How Electricity Reaches Users
How Electricity Reaches Users
This item has no instructions
What words do you link with how electricity reaches users?
Use this to surface prior knowledge such as power stations, pylons, transformers, cables, homes, voltage or National Grid. Pick out any misconceptions to revisit later.
Learning goal
I can explain how electricity is supplied, including the main transmission and distribution voltages and the key parts of the network.
This item has no instructions
Electricity supply industry
The electricity supply industry has three main parts:
generation
transmission
distribution
Electricity is produced first, moved across the country next, and then delivered to users at suitable voltages.
Use this as the lesson overview. Keep the three terms consistent throughout the lesson.
Generation
Electricity is generated at power stations.
In the UK, power stations are often close to the fuel source.
They may also be near a large supply of cooling water.
Base-load power stations often generate at about 25 kV.
Base-load here means stations that provide a steady supply of electricity over long periods.
Why electricity must be moved
Power stations are not always close to where electricity is needed. Electricity must be transmitted from power stations to load centres so demand can be met across the country.
A load centre is an area where many users need electricity, such as towns, cities or industrial areas.
From generation to supply
Power station output at about 25 kV → step-up transformer → high-voltage transmission network → step-down transformers near load centres → local distribution → supply to homes, businesses and industry
This slide gives the overall journey before separate transmission and distribution details are taught.
The National Grid
The National Grid is the high-voltage transmission network in Great Britain.
It links power stations with major sub-stations.
It allows electricity generated in one area to meet demand in another.
This item has no instructions
What is the correct order in the electricity supply industry?
Generation, transmission, distribution
Transmission, generation, distribution
Distribution, transmission, generation
Generation, distribution, transmission
Checks the three-part structure from the opening slides and the journey from power station to user.
From power station to the Grid
Electricity is generated at about 25 kV in a power station. A step-up transformer raises the voltage before it enters the National Grid to be moved towards load centres.
All three blanks come directly from the overview and early process slides.
Why a grid is useful
A grid connection improves security of supply.
Electricity can be routed from different generating sources.
During light demand, some power stations can be shut down for maintenance.
Supply to consumers can still be maintained.
Link this to resilience: the system does not depend on a single power station feeding a single area.
Why transmission uses high voltage
A step-up transformer raises the power station output to transmission voltage. High voltage is used because it reduces I²R losses in the system, so less energy is wasted as heat during transmission.
Do not extend into full power equations unless needed. The key idea is lower losses over long distances.
Transmission voltages
400 kV
275 kV
132 kV
These are the transmission voltages used on the network.
These voltages match the assessment criteria and should be memorised accurately.
How transmission voltages changed
1933: the original Grid operated at 132 kV.
1949: 275 kV links were added.
From 1965: parts of the Grid were upgraded to 400 kV.
Voltages above 200 kV became known as the supergrid.
This is historical context for how the system developed; keep the focus on the voltage levels.
Overhead transmission lines
Most of the Grid uses overhead power lines.
Cables are suspended from insulators.
The insulators are mounted on metal pylons, also called transmission towers.
This item has no instructions
Transmission line construction
A pylon normally carries two or three phase circuits.
Earth wires or guard wires are placed at the top.
They intercept lightning and divert it safely to ground.
Conductors usually have a steel core for strength with aluminium around the outside.
The transmission cable itself has no insulation applied.
Students may expect all electrical cables to be insulated. Emphasise that overhead conductors are separated from surroundings by air and height.
Why is electricity transmitted at high voltage?
To increase current
To reduce I²R losses
To cool the cables
To insulate the pylons
The key idea is less energy wasted as heat over long distances.
Transmission system facts
Transmission voltages on the network include 400 kV, 275 kV and 132 kV. Overhead cables are hung from insulators mounted on metal pylons.
Reinforces the assessed transmission voltages and the support arrangement of overhead lines.
How does the grid improve security of supply?
Expected answer elements: the grid links power stations and major sub-stations, improves security of supply, allows electricity from one area to meet demand in another, and lets some stations shut down for maintenance while supply continues.
Stepping down near load centres
When transmission lines reach the vicinity of load centres, step-down transformers reduce the voltage for secondary transmission, such as 132 kV and 66 kV, before electricity is reduced further for local distribution.
66 kV appears in the handout as part of the step-down process, even though it is not one of the listed assessment distribution voltages.
Distribution voltages
33 kV
11 kV
400/230 V
These are the main distribution voltages.
Keep the notation exactly as listed: 400/230 V.
Local distribution
When electricity reaches a load centre, such as a town or city, substations reduce the voltage for local distribution.
Electricity may be distributed at 33 kV and 11 kV around towns, cities and industrial areas.
The voltage is eventually reduced further so that electricity can be safely supplied to homes and businesses at 400v and 230v
This item has no instructions
Supply to different users
Commercial and industrial users commonly receive 400 V.
Domestic users receive 230 V.
Heavy industry may be supplied at 33 kV or 11 kV, depending on demand.
Clarify that larger users may take supply at higher voltages because of greater power demand.
Distribution path
Secondary transmission → local distribution at 33 kV and 11 kV → further step-down → 400 V for many commercial and industrial users / 230 V for domestic users
This summarises the sequence of voltage reduction through the distribution stage.
Which is a main distribution voltage?
275 kV
400 kV
33 kV
132 kV
Tests the distinction between transmission and distribution voltages.
Stepping down for users
Near load centres, electricity is reduced for local distribution at 33 kV and 11 kV. It is then stepped down again to 400 V for many commercial users and 230 V for domestic users.
Keeps the distribution pathway and end-user voltages clear.
Power stations
Power stations are where electricity is generated.
They are the starting point of the supply system.
Their output is sent onwards to the transmission network.
This item has no instructions
Transformers
Step-up transformers raise voltage for transmission.
Step-down transformers lower voltage for distribution and final supply.
They are essential at each stage where the voltage level changes.
This item has no instructions
Sub-stations
Sub-stations connect parts of the network.
They contain equipment for switching and transforming voltage.
Major sub-stations link the transmission and distribution systems.
This item has no instructions
Pylons and insulators
Pylons support overhead transmission lines.
Insulators hold the conductors in place.
Together, they keep high-voltage lines safely supported and separated from the tower structure.
This item has no instructions
Cables
Cables carry electrical energy through the network.
In overhead transmission, conductors are suspended from pylons.
The conductors commonly use a steel core with aluminium around it.
This item has no instructions
Network components together
Power stations generate electricity. Transformers change voltage. Pylons, insulators and cables carry electricity across the transmission system. Sub-stations connect sections of the network and help move supply from transmission into distribution.
This slide pulls the component list together as one system rather than isolated parts.
Which component changes voltage in the network?
Pylon
Cable
Transformer
Insulator
A straightforward component-function match before the final system summary.
Network components together
A power station generates electricity. A transformer changes the voltage. Pylons support overhead lines, while insulators hold conductors in place.
Uses the final component summary to connect each part with its main job.
How do these network parts work together?
Expected answer elements: students should mention several of these accurately and link them as a system: power stations generate, transformers raise/lower voltage, pylons support lines, insulators hold conductors safely, cables carry electricity, sub-stations connect sections and link transmission to distribution.
What is one thing you will remember from this lesson?
This item has no instructions
Which part of this lesson felt hardest to understand?
This item has no instructions
What helped you understand electricity supply best?
This item has no instructions
Glossary
generation - the production of electricity at a power station
transmission - the movement of electricity over long distances at high voltage
distribution - the delivery of electricity from local networks to users
National Grid - the high-voltage transmission network in Great Britain
load centre - an area where electricity demand is concentrated
step-up transformer - a transformer that raises voltage
step-down transformer - a transformer that lowers voltage
This item has no instructions
Glossary
sub-station - a site in the network where electricity is switched or transformed
pylon - a metal tower that supports overhead transmission lines
insulator - a component that supports a conductor without allowing current to pass into the support
conductor - the part of a cable that carries electric current
guard wire - an earth wire at the top of a pylon that helps protect lines from lightning
supergrid - parts of the British transmission system operating above 200 kV
This item has no instructions