BHP_Battery-Trolley_Haulage(1)


INDUSTRY BRIEFING · BATTERY-ELECTRIC HAULAGE

Development of a Dispatching Model for Battery-Trolley Haulage Systems

Cutting the two biggest costs in electrified mine haulage — charger congestion and premature battery replacement — inside a single dispatch decision.

Mohammad Mirzehi

·

PhD Candidate, The University of Queensland

·

Supervisors: Prof. Mehmet Kizil · Prof. Peter Knights · Dr Micah Nehring

·


1 / 19
next
Slide 1: Slide
New lesson editor

This lesson contains 19 slides, with text slides.

Report this lesson

Items in this lesson


INDUSTRY BRIEFING · BATTERY-ELECTRIC HAULAGE

Development of a Dispatching Model for Battery-Trolley Haulage Systems

Cutting the two biggest costs in electrified mine haulage — charger congestion and premature battery replacement — inside a single dispatch decision.

Mohammad Mirzehi

·

PhD Candidate, The University of Queensland

·

Supervisors: Prof. Mehmet Kizil · Prof. Peter Knights · Dr Micah Nehring

·





01 · WHO I AM

A practitioner's view — not just a researcher

Four years working across open-pit mine sites before bringing that operational lens to electrified haulage as a PhD candidate at The University of Queensland.

Short- to long-term planning — building mine plans from shift schedules through to life-of-mine strategy.

Haulage operations management — running truck–shovel systems against live production targets on site.

Dispatch data analysis — turning raw dispatch output into decisions operators can act on.

Productivity & cost optimization — pushing throughput and operating cost in the same direction, not against each other.


Contents

01

02

The shift to electrification

Our project

03

Modelling battery degradation

04

Dispatching the fleet



01

The shift to electrification



01 · CONTEXT

Electrification has moved from aspiration to necessity

OEMs are shipping commercial battery-electric haul trucks, carbon pricing is tightening in key mining regions, and ESG commitments are hardening into procurement decisions. Haulage — not processing — is where most surface mines will make or break their decarbonization targets, which is why the diesel-to-battery transition is now a board-level question rather than a pilot-project curiosity.

40–60%

of surface-mining energy use is haulage

#1

Scope-1 emitter at surface mines

3–5 yr

battery pack life under mining duty, before replacement

The hardware transition is already underway. The open question — and the one this project answers — is how a site actually dispatches an electrified fleet once the trucks arrive: how it schedules charging, swapping and trolley assist without either starving production or burning through battery packs faster than budgeted.



01 · THE PROBLEM (1/2)

Electrification trades a fuel bill for a replacement bill

Battery packs under intensive mining duty cycles fail years before the truck does — replacement is an ongoing expense that decides whether electrification pencils out.

Harsh operating environment

High ambient and cell temperatures accelerate ageing — heat compounds every other stress factor on the pack.

Demanding duty cycles

Deep discharges dominate wear: depth of discharge is the strongest and most nonlinear driver of degradation under mining duty.



01 · THE PROBLEM (2/2)

Today's tools weren't built for electrified haulage

Commercial dispatch software is inflexible — it can't jointly represent chargers, swap bays, trolley sections, state-of-charge limits and infrastructure capacity in one framework.

Battery life is analysed separately from operations — degradation is evaluated after the fact, and charging is treated as fixed rules rather than decision variables the dispatcher can tune.

The result: decisions that look optimal in the moment can quietly wear the battery faster, raising long-term replacement cost while the schedule reports a productive shift.



02

Our project



02 · OUR PROJECT

Simultaneously optimizing production and battery life

We simultaneously schedule charger bays, swap stations, trolley sections and trip sequencing across the whole fleet, respecting the physical infrastructure actually on site. In parallel, a battery-degradation model quantifies how each dispatch and charging decision affects battery life — and that cost is fed directly into the dispatch objective, so production and pack longevity are optimized together, not in separate steps.

This directly attacks the two biggest cost drivers in electrified mine haulage: productivity loss from charger congestion, and premature battery replacement from poorly managed duty cycles. Both are treated as one decision, solved once, rather than two separate reviews after the shift.



02 · OUR PROJECT

One model that unites dispatch, battery life & charging

01 · Dispatch across every charging mode

Stationary charging, battery swapping and dynamic (trolley) charging — allocation, routing and trip sequencing in a single framework.

02 · Degradation cost inside the decision

Model and evaluate battery ageing, then feed its cost into the objective so wear is weighed in real time, not reviewed afterwards.

03 · Optimized charging & infrastructure

Size and place chargers, swap bays and trolley sections to match the fleet — infrastructure becomes a design variable, not a fixed input.



03

Modelling battery degradation



03 · MODELLING BATTERY DEGRADATION

Rainflow: counting the cycles that age the pack

Borrowed from metal-fatigue analysis: treat the state-of-charge trace like a stress history, decompose it into depth-tagged cycles, and weight damage by depth across the entire trajectory — not instant by instant.


1

SoC trace

The input signal, from real or simulated operating data.

→


2

Cycle extraction

Turning points identified and decomposed into depth-tagged charge/discharge cycles.

→


3

Depth-weighted life loss

Cycles weighted by depth of discharge across the whole trajectory, not a single instant.

→


4

Degradation cost

Translated into a cost per shift, ready to feed the dispatch objective.



03 · MODELLING BATTERY DEGRADATION

Comprehensive by design — and cross-validated

Rainflow core

Depth-weighted cycle damage across the full state-of-charge trajectory — the whole history, not a snapshot.

Blind spots covered

Paired with an empirical multi-factor model adding temperature and C-rate — the stresses rainflow alone can miss.

Data-driven refinement

Real and simulated SoC data calibrate the method to site conditions and improve its accuracy.

Running the physics-based and data-driven methods side by side gives a degradation estimate we can validate — not a single unchecked number.



04

Dispatching the fleet



04 · DISPATCHING THE FLEET

A physics-informed MILP for the whole fleet

Every truck's trip, source assignment and charging choice is a decision variable — not a fixed schedule imposed in advance.

Trucks compete for loading and unloading just as they compete for charging stations and trolley sections, so congestion in either system is captured by the same model.

Physical constraints — charger counts, bay capacity, trolley coverage, state-of-charge limits — bound every feasible solution, so the schedule is one the site can actually run, not a theoretical optimum that ignores infrastructure.

Formulated as a mixed-integer linear program (MILP), solved on a rolling horizon so dispatch decisions can be refreshed as conditions on site change.



04 · DISPATCHING THE FLEET

Balancing today's tonnes against tomorrow's battery


MAXIMIZE

short-term production

−


MINIMIZE

long-term battery replacement cost

=


MILP OBJECTIVE

solved once, every dispatch cycle

Degradation results enter the objective as a cost term, so the optimizer weighs the trade-off automatically — instead of treating battery wear as something reviewed after the shift.



04 · DISPATCHING THE FLEET

Every charging mode, one framework

Stationary charging

Trucks charge at fixed bays during queuing or idle time — the baseline strategy most fleets already use.

Battery swapping

A depleted pack is exchanged for a charged one at a swap station, trading downtime for deeper, more damaging cycles.

Dynamic (trolley) charging

Trucks draw power from trolley lines on loaded ramps, cutting depth of discharge without stopping to charge.



04 · DISPATCHING THE FLEET

Infrastructure becomes a design variable

Charger and swap-bay counts, placement and trolley-section coverage are sized to the fleet, not assumed fixed in advance.

The model captures competition for these shared resources alongside loading and unloading — the same congestion that limits productivity today.

This turns infrastructure planning into an output of the model rather than an input assumption — useful for sizing a new electrified fleet or expanding an existing one.

The dispatch logic is being cross-checked in HaulSim, an independent discrete-event simulator, alongside the MILP solver itself, to validate behaviour before it is proposed for a real site.



INDUSTRY BRIEFING · BATTERY-ELECTRIC HAULAGE

Thank you

A haul-truck battery runs out of life, not just charge — we're building the dispatch model that plans for both.

Deeper material available on request: full research proposal · battery-degradation conference deck · fleet-simulation movie.

Mohammad Mirzehi

·

m.mirzehi@uq.edu.au

·

The University of Queensland