Pure substances and mixtures
Pure substances and mixtures
Deze slide heeft geen instructies
Learning goal
I can explain pure substances and mixtures at the micro and macro levels, including homogeneous and heterogeneous mixtures, melting and boiling diagrams of mixtures, and calculations of composition.
Deze slide heeft geen instructies
What words do you link to pure substances and mixtures?
Use this to surface prior ideas such as pure, mixed, particles, solution, uniform, layers, solid, liquid, water, air. Pick a few responses and ask whether they belong to the macro level, the micro level, or both.
What is a pure substance?
Made of one kind of particle only
Can be an element or a compound
Has constant properties such as melting point and boiling point
Looks the same throughout the sample
At micro level, 'one kind of particle' means all particles are identical: all the same atoms for an element, or all the same molecules/ions for a compound. Emphasise that a pure substance is not the same as a single element only.
What is a mixture?
Contains two or more substances together
The particles are mixed, not chemically changed into one new substance
The composition can vary
The substances keep their own properties
Students often confuse a mixture with a compound. Stress that in a compound, particles are chemically bonded in a fixed ratio; in a mixture, substances are together without forming one new particle type.
Macro and micro views
At the macro level, we describe what we can observe, such as colour, layers, clarity, melting point and boiling point.
At the micro level, we describe what particles are present, how many types there are, and how they are arranged and move.
This slide sets the chemistry lens for the whole lesson. Keep returning to macro = observable, micro = particle model.
Pure substance or mixture?
Mixture
One particle type
Fixed composition
Sharp melting point
Sharp boiling point
Pure substance
Two or more particle types
Variable composition
Melts over a range
Boils over a range
Use the word 'sharp' here to mean one exact temperature under fixed pressure. This will connect directly to the later melting and boiling diagrams.
Melting and boiling of mixtures
A pure substance changes state at one fixed temperature.
A mixture usually changes state over a temperature range because different particles do not all change state at exactly the same temperature.
Do not overcomplicate with exceptions such as azeotropes unless students raise it. For this level, the key contrast is fixed temperature versus temperature range.
Boiling point versus boiling range
Deze slide heeft geen instructies
Why does a mixture boil over a range?
In a liquid mixture, some particles escape into the gas phase more easily than others.
During boiling, the composition of the liquid can change, so the boiling temperature can also change. That is why a mixture often has a boiling range instead of one boiling point.
A simple example is salt solution versus pure water, but keep the explanation at particle level rather than turning it into a long example.
Why does a mixture melt over a range?
At the micro level, a mixture contains different particles.
These particles attract each other with different strengths. As heating continues, some parts of the mixture can melt earlier than others, so the temperature is not constant during the whole change.
Link attraction strength to the energy needed to separate particles enough for melting. Keep it qualitative.
Reading a diagram
Flat line during melting or boiling: pure substance
Sloping section during melting or boiling: mixture
The graph shows whether the sample has one particle type or several
Make clear that students should focus on the phase-change part of the graph, not just any flat or sloping section elsewhere.
Which description fits a pure substance best?
One particle type
Variable composition
Several phases
Temperature range
Checks the core contrast from slides 2 to 6. Distractors come from mixture properties: variable composition, visible phases, and melting or boiling over a range.
Pure substance or mixture
A pure substance has one kind of particle only and changes state at one fixed temperature. A mixture contains different particles and usually changes state over a temperature range.
All four blanks echo the exact load-bearing contrasts taught in the first subtopic.
How are macro and micro descriptions different?
Expected answer elements: macro level = what you can observe, such as clear/cloudy, layers, melting point, boiling point; micro level = particle types, arrangement, movement. Students should contrast observable properties with the particle model.
Homogeneous mixture
Looks uniform at the macro level
Has one visible phase
The different particles are evenly spread at the micro level
Example: salt dissolved in water
Use 'phase' only as far as helpful: one visible phase means it appears as one material throughout. Avoid drifting into full phase theory.
Heterogeneous mixture
Not uniform at the macro level
Has more than one visible phase
Different particles are not evenly spread
Example: oil and water
Students may think 'visible' means they must always see particles. Clarify that they see regions or layers, not individual particles.
Same substances, different mixture type
Heterogeneous
Salt + water
Salt particles spread between water particles
Clear solution
Homogeneous
Sand + water
Sand particles stay separate
Cloudy mixture or sediment
This slide helps students see that the key issue is particle distribution, not simply how many substances are present.
Macro and micro difference
A homogeneous mixture looks like one substance at the macro level, but at the micro level it still contains different particle types.
A heterogeneous mixture shows its non-uniform character at both levels.
This is an important misconception check: a homogeneous mixture is still a mixture, not a pure substance.
Solutions
A solution is a homogeneous mixture
One substance is dissolved in another
Macro: clear and uniform
Micro: solute particles are spread among solvent particles
Use the terms solute and solvent orally if useful, but keep the slide simple.
Suspensions and emulsions
A suspension has solid particles spread through a liquid
An emulsion has droplets of one liquid spread through another liquid
Both are usually heterogeneous mixtures
Examples you might mention: muddy water as a suspension; milk as an emulsion. Milk can appear uniform macroscopically, but microscopically it contains dispersed droplets.
Describing mixtures
colour
clear or cloudy
one layer or several layers
solid, liquid or gas
particle types
particle distribution
dissolved, separate or layered
relative amounts
Macro level
Micro level
This slide gives a simple checklist for later descriptions.
Examples of mixtures
Air: homogeneous mixture of gases
Brass: homogeneous mixture of metals
Seawater: mainly a homogeneous solution
Granite: heterogeneous mixture of minerals
For seawater, 'mainly homogeneous' avoids overclaiming because natural samples may contain suspended particles too.
A clear salt solution is still a mixture because it has...
one particle type
different particle types
more than one layer
a sharp boiling point
Targets the misconception from slide 13: homogeneous does not mean pure.
Homogeneous or heterogeneous
A homogeneous mixture looks uniform at the macro level and has one visible phase. In a heterogeneous mixture, particles are not evenly spread and the sample may show layers or sediment.
Uses the exact language from slides 10 to 16 and reinforces both macro and micro descriptions.
Which example from this block do you find easiest to classify?
Air
Brass
Seawater
Granite
Deze slide heeft geen instructies
Composition of a mixture: Mass percentage
Mass percentage tells us how much of a substance is present in a mixture by mass.
mass % = (mass of substance / total mass of mixture) × 100
Use grams in worked verbal examples, but do not add a full calculation here if time is short.
Composition of a mixture: Volume percentage
Volume percentage tells us how much of a substance is present in a mixture by volume.
volume % = (volume of substance / total volume of mixture) × 100
Useful examples are gases in air or ethanol in a drink, but keep the slide formula-focused.
Grams per litre
Grams per litre shows how many grams of a substance are present in 1 litre of mixture.
g/L = mass of substance (g) / volume of mixture (L)
Emphasise the unit carefully: grams divided by litres. Students often confuse this with mass percentage.
Choosing the right measure
Use mass % when
volumes are given
gases or liquid mixtures are compared by volume
solution concentration is given as mass per volume
Use volume % or g/L when
masses are given
solid or liquid amounts are compared by mass
composition is based on weighing
Students need to choose the correct formula from the information given. This is often harder than the arithmetic itself.
Which formula matches grams per litre?
mass ÷ volume
volume ÷ mass
mass ÷ total mass
volume ÷ total volume
Checks formula choice rather than arithmetic. Distractors mirror the other composition measures.
Choosing a composition measure
Use mass percentage when masses are given. Use volume percentage when volumes are compared. Use grams per litre when a solution is described as mass per volume.
This anchors the decision step from slide 21, which is often harder than the calculation itself.
What clue tells you which composition formula to use?
Expected answer elements: students should state which information tells them the correct measure to use, for example masses, volumes, or mass per volume, and mention units such as %, g, mL, L, or g/L.
What is one idea from this lesson you will remember?
Reflection prompt with no correct answer. Invite students to name one clear idea, such as fixed temperature vs range, homogeneous vs heterogeneous, or mass % vs g/L.
What helped you understand this topic best?
Reflection prompt with no correct answer. Encourage students to mention a representation or explanation style, for example particle diagrams, comparing macro and micro, or reading the heating graph.
Which part still feels hardest to you?
Reflection prompt with no correct answer. Useful for planning follow-up: students may mention graphs, mixture types, or choosing between composition formulas.
Glossary
pure substance - a material made of one kind of particle only
mixture - a combination of two or more substances
macro level - the level of observable properties and behaviour
micro level - the particle level used to explain matter
homogeneous mixture - a mixture that is uniform throughout
heterogeneous mixture - a mixture that is not uniform throughout
solution - a homogeneous mixture in which one substance is dissolved in another
Deze slide heeft geen instructies
Glossary
suspension - a heterogeneous mixture with solid particles spread through a liquid
emulsion - a mixture of droplets of one liquid spread through another liquid
mass percentage - the percentage of a substance in a mixture based on mass
volume percentage - the percentage of a substance in a mixture based on volume
grams per litre - the mass of a substance present in 1 litre of mixture
melting range - the temperature interval over which a mixture melts
boiling range - the temperature interval over which a mixture boils
Deze slide heeft geen instructies