Introduction May 23 1.pptx

EWIS & Electrical Wiring Husbandry

Instructor:

Class:

1 / 28
volgende
Slide 1: Slide
newEditor

In deze les zitten 28 slides, met tekstslides.

Dit is niet oké

Onderdelen in deze les

EWIS & Electrical Wiring Husbandry

Instructor:

Class:

State Location

Fire & Medical Emergency

Dial:

222

Building 178

3 Wing

Fulton Block.

Fire Alarm

Nearest telephones

Fire Fighting Equipment

Exit routes

EHF external reporting point.

Health & Safety

Employers

The Health & Safety at Work Act 1974

Furthermore;

Safety precautions (Factories Act 1961)

Personal Protection Equipment (PPE)

Health & Safety at Work Act

Health and Safety at Work Act 1974

JSP 815 Defence Environment & Safety Management Document

(JSP 375 Vol. 1 Chapter 13 Annex B)

MoD H & S Training

Health & Safety Information

Health & Safety at Work Act

Employee’s.

Take reasonable care of themselves and any other people that may be affected

Co-operate with their employers and others to enable them to comply with statutory duties

Electricity can Kill or Maim

Directly - by means of Shock

Indirectly - Smoke inhalation from burns started by electrical fires or falls from height

Electrical Safety

All Electrical equipment presents hazards of electrical shock

When high voltage supplies are used the danger of LETHAL electric shock must be considered

Service regulations (1988) define potentially LETHAL voltages as those in excess of?

Electrical Safety

50v ac (rms)

120v dc

Thus the domestic mains supply of 240 v ac is LETHAL

However all voltages must be considered dangerous

Electrical Safety

To reduce the risk of electric shock or fire the following precautions are recommended:

Remove or cover jewellery

Maintain a tidy work area

Pre-use checks

Electrical Safety

Control of Substances Hazardous to Health

COSHH act 1990

The main substances that are used in this bay are I.P.A. (Isopropyl Alcohol) & Flux and should be treated with respect

C.O.S.H.H.

Toxic substances enter the body by two main routes:

Absorption


Direct Entry

Toxic Substances

The packaging and labelling of Dangerous Substances Regulations 1984

Identification System for dangerous Engineering Substances

Toxic

Corrosive

Explosive

Highly Inflammable

Harmful or Irritant

Oxidising

Hazardous Warning Symbols.

Typical Hazard Warning Labels

Risk of Burns, Shock, Injury

First Aid Kit, Accident & Incident Book/Form 7454

First Aiders: Mrs Edwards, Mr Williams

(accurate @ 9/5/23)

First Aid

Health & Safety

COSHH

Lethal Voltages

Tool Control

Fire Alarm and Exit Routes

Toxic Substances and Symbols

Summary

You should now be able to state the course aims, COSHH and H&S regulations.

Objective

Sign to confirm understanding

Objective

Course / Bay Rules:

Time Keeping

Determination

Food and Drink

Covid- Marking

Mobile Phones

Breaks/Personal Effects

Diversions

VLE/Comms

  • Tool trays are to be used –NO FOD

  • All tools are to booked out correctly

  • All tools are to be checked out prior to starting work and back at the end of the working day by two nominated personnel – nominated by Senior man (unless on task)

  • If you leave earlier then ensure your tools are returned. If this fails then we all remain in class until the last person finishes

Tool Control

Welcome Course xxxx

(insert course pic)


Course Content:

  1. EWIS Theory Trg (14 periods) – Examined!

    1. Crimping & Soldering practical Training (3 wks)

    2. Final Test Job (FTJ) – (2 days)

    3. EWIS Theory Exam (25 Multiple choice)

    4. Fibre Optics Theory Trg (1 day) NOT WPNS

    5. Fibre Practical (2 days) – Practical Exam (NOT WPNS)

    6. Fibre Theory Exam. (25 Multiple choice) NOT WPNS


Introduction

FTJ – Final test job

VLE

  • Contact;


  • Learn contact email address:


Using VLE during EHF phase

Any Questions?