Workplace Hazards and Safety

Spotting Hazards at Work

1 / 26
volgende
Slide 1: Slide
newEditorElectrical InstallationFurther Education (Key Stage 5)

In deze les zitten 26 slides, met interactieve quizzen en tekstslides.

time-iconLesduur is: 60 min
Dit is niet oké

Onderdelen in deze les

Spotting Hazards at Work

Open with the idea that hazards exist in nearly every workplace, not only in factories or building sites. The lesson will focus on recognising hazards, choosing sensible controls, and responding safely.

Learning goal

I can identify common workplace hazards,


explain suitable control measures,


and show a proactive approach to staying safe at work.

Deze slide heeft geen instructies

What hazards might you notice in an ordinary workplace?

Use the responses to surface prior knowledge across different settings such as offices, kitchens, warehouses, shops, and care environments. Invite learners to notice that hazards are not only dramatic dangers but also everyday risks.

What is a workplace hazard?

  • A hazard is anything with the potential to cause harm

  • Harm may include injury, illness, stress, or damage

  • Hazards can be obvious or easy to overlook

  • Safe working starts with noticing them early

Clarify the difference between a hazard and a risk if needed: the hazard is the source of harm, while risk is the chance that harm will happen and how serious it could be.

Common hazard types

  • Physical hazards: slips, trips, noise, moving machinery

  • Chemical hazards: cleaning fluids, fumes, dusts

  • Biological hazards: bacteria, mould, bodily fluids

  • Ergonomic hazards: poor posture, repetitive movement, heavy lifting

  • Psychosocial hazards: stress, fatigue, bullying, pressure

Keep examples broad so learners can connect them to offices, shops, kitchens, workshops, warehouses, and care settings.

Everyday examples

  • Wet floors in corridors or kitchens

  • Trailing cables across walkways

  • Unlabelled chemicals in storage areas

  • Boxes stacked unsafely on shelves

  • Staff lifting loads with poor technique

These examples help learners move from abstract hazard categories to real workplace situations. You can ask learners to link each example back to a hazard type during explanation.

Why hazards matter

Uncontrolled hazards can lead to accidents, long-term health problems, lost working time, damaged equipment, and legal consequences for an employer. Recognising hazards early helps prevent harm before an incident happens.

Emphasise prevention. Learners often think safety matters only after an accident, but the real purpose is to stop accidents and ill health from happening at all.

Which example is a chemical hazard?

A

Wet floor

B

Poor posture

C

Cleaning fluid

D

Bullying

Checks whether learners can distinguish hazard categories from the earlier examples and list of common hazard types.

Hazards and harm

A workplace hazard is anything with the potential to cause harm. Harm may include injury, illness, stress, or damage. Spotting hazards early helps prevent an incident before it happens.

hazard
injury
incident
risk
accident
fatigue
equipment

Reinforces the core definition and the prevention message from slides 2 to 5.

Controlling risk

  • Control measures are actions that reduce or remove danger

  • The best controls remove the hazard if possible

  • If removal is not possible, exposure should be reduced

  • Controls should match the workplace and the task

This slide introduces control measures in general before showing the hierarchy. Stress that not all controls are equally effective.

A simple order of control

  • Eliminate the hazard

  • Substitute it with something safer

  • Isolate people from the hazard

  • Use safe systems of work and training

  • Use personal protective equipment when needed

Present this as a practical version of the hierarchy of control. Explain that PPE is important, but it is usually less reliable than removing or isolating the hazard because the hazard still exists.

Scenario: spilled liquid

Control measures

  • Slip risk on the floor

  • People passing through may fall

  • The area may become more dangerous if ignored

Hazard

  • Block or mark the area quickly

  • Clean the spill using the correct method

  • Report it if extra help is needed

  • Check why it happened to prevent a repeat

This is one of the requested work activities, framed as a workplace scenario rather than an interactive task. Use it to model how learners move from identifying the hazard to selecting control measures.

Scenario: lifting stock

Control measures

  • Heavy or awkward loads

  • Strain on the back, shoulders, or knees

  • Poor posture increases the chance of injury

  • Use trolleys or lifting aids

  • Break loads into smaller parts

  • Follow safe lifting technique

  • Ask for help with difficult items

Hazard

This is the second work activity scenario. Reinforce that control measures can change the task itself, not just add protective gear.

Using PPE properly

  • PPE may include gloves, goggles, masks, helmets, or high-vis clothing

  • It must fit properly and be suitable for the hazard

  • Damaged or missing PPE should be reported

  • PPE supports safety, but does not remove the hazard

Students may overestimate PPE. Remind them that PPE is often the last layer, not the main solution.

What is usually the best type of control?

A

PPE

B

Training

C

Elimination

D

Warning sign

The distractors reflect common overreliance on PPE or administrative controls. The key idea is that removing the hazard is strongest.

Choosing control measures

The best controls remove the hazard if possible. If that cannot be done, workers may isolate people from the danger or use safe systems of work. PPE can help, but it does not remove the hazard.

remove
isolate
work
PPE
substitute
report
clean
warning

Echoes the simple order of control and the reminder that PPE is a later line of defence.

Which control fits one scenario best, and why?

Expected elements: for the spill, mark or block the area, clean it safely, report if needed, and prevent recurrence. For lifting, use aids, reduce load size, apply safe technique, or ask for help. Encourage learners to justify why their chosen control is suitable.

Responding to hazards

  • Stop and assess the situation

  • Do not take unnecessary risks

  • Warn others if there is immediate danger

  • Report the hazard through the correct workplace procedure

  • Take action only if it is safe and within your role

Some learners think acting quickly always means fixing the problem themselves. Stress that safe response includes reporting and getting the right help.

A proactive safety attitude

  • Follow safety rules every day

  • Use equipment as instructed

  • Report near misses as well as accidents

  • Speak up when something seems unsafe

  • Good safety habits protect everyone

Explain that proactive behaviour means not waiting for an accident before taking safety seriously. Near misses are valuable because they show where harm almost happened.

Safety in daily practice

Workplace safety depends on routine choices: keeping areas tidy, following procedures, using the right equipment, and reporting concerns promptly. A safer workplace is created by consistent actions, not by chance.

Use this as the landing point of the lesson: learners should now see safety as an ongoing responsibility linked to awareness, controls, and behaviour.

What should you do first when you notice a hazard?

A

Stop and assess

B

Fix it alone

C

Ignore it

D

Find PPE

Targets the response sequence from slide 11 and challenges the misconception that quick action always means solving the problem yourself.

Which proactive action most improves daily safety?

1

Reporting near misses

2

Following rules

3

Speaking up

4

Keeping areas tidy

Deze slide heeft geen instructies

How does a proactive attitude make work safer?

Expected elements: routine choices, consistency, speaking up, reporting concerns, following procedures, and using equipment correctly. This is for discussion rather than exact marking.

What is one safety idea you will remember?

Encourage concise reflection on the most important takeaway, such as spotting hazards early, choosing stronger controls, or reporting concerns.

What helped you understand this lesson best?

Look for metacognitive comments about examples, scenarios, hazard categories, or the order of control.

Glossary

hazard - anything with the potential to cause harm

risk - the chance that a hazard will cause harm

control measure - an action used to reduce or remove risk

PPE - personal protective equipment worn for safety

ergonomic hazard - a hazard linked to posture, movement, or physical strain

near miss - an incident that could have caused harm but did not

safe system of work - a set way of doing a task to reduce danger

Deze slide heeft geen instructies