Mastering Timber: 20 Question Quiz
Mastering Timber: 20 Question Quiz
What do you already know about using timber in civil engineering?
Learning Objective
At the end of the lesson you will confidently answer key questions about timber properties, classifications, and applications in civil engineering.
About This Quiz
This 20-question quiz covers vital timber concepts for CIV144, based on Harte (2009) and Materials in Construction. Test your knowledge on timber’s structure, properties, and sustainability!
1. Timber Categories
What are the two main categories of tree species used for timber production? A. Softwoods and hardwoods B. Conifers and pines C. Heartwood and sapwood D. Tropical and temperate
2. Function of the Cambium
In a tree cross-section, what is the function of the cambium? A. To store nutrients B. To produce new wood cells C. To protect the trunk from insects D. To provide structural support
3. Nutrient Storage Layer
Which layer of wood is primarily responsible for nutrient storage and transport? A. Heartwood B. Sapwood C. Cambium D. Bark
4. Anisotropic Nature
Timber is said to be anisotropic because: A. It has uniform properties in all directions B. Its strength is independent of grain direction C. Its properties vary with grain direction D. It is unaffected by moisture
5. Standard Moisture Content
Controlling indoor timber moisture is crucial for structural integrity and performance.
Civil Engineering Relevance
Typical Indoors
The moisture content of wood in a standard indoor environment is approximately: A. 6% B. 12% C. 25% D. 30%
6. Fibre Saturation Point
The fibre saturation point (FSP) in most species occurs at: A. 10–15% B. 25–35% C. 50% D. 70%
7. Moisture Loss Effects
Below the FSP, a reduction in moisture content generally causes timber to: A. Increase in volume B. Decrease in strength C. Increase in strength and stiffness D. Decay faster
8. Timber Shrinkage
Shrinkage in timber occurs most in which direction? A. Longitudinal B. Radial C. Tangential D. Parallel to grain
9. Softwood Density
Why Density Matters
Density affects strength, handling, and durability of structural timber.
What is the approximate density range for softwoods used in construction? A. 100–300 kg/m³ B. 400–650 kg/m³ C. 700–1000 kg/m³ D. 1100–1500 kg/m³
Construction Use
10. Timber Insulation Advantage
Timber’s low thermal conductivity makes it a good: A. Electrical conductor B. Insulator C. Fire-resistant material D. Structural metal substitute
11. Tensile Strength Range
The tensile strength of softwoods parallel to the grain is typically within which range? A. 10–30 MPa B. 30–60 MPa C. 70–140 MPa D. 200–250 MPa
12. Impact of Knots
Knots in timber reduce strength because: A. They are areas of higher density B. They distort the grain direction C. They increase moisture absorption D. They contain excess sap
13. Visual vs Machine Grading
The main difference between visual and machine grading of timber is that: A. Visual grading uses machines to measure moisture content B. Machine grading directly measures mechanical properties C. Visual grading is always more accurate D. Machine grading assesses colour and appearance only
14. European Timber Strength Classes
A. Compressive and Density B. Coniferous and Deciduous C. Clear and Defective D. Core and Durable
What do C & D Stand for?
Timber Markings
C=Coniferous, D=Deciduous; key strength grades for construction.
15. Timber Sustainability
Timber can be described as a sustainable material because: A. It is non-renewable but long-lasting B. It captures and stores carbon dioxide C. It cannot decay D. It has the highest embodied energy
16. Engineered Timbers
Which engineered wood product consists of layers of veneers glued together? A. Oriented Strand Board (OSB) B. Glulam C. Plywood D. I-joist
17. Timber Char Rate
The char rate of softwoods during a fire is approximately: A. 0.1 mm/min B. 0.5 mm/min C. 1.0 mm/min D. 2.0 mm/min
18. Glulam Advantages
Distribution of defects increases predictability and performance for structures.
What is the key advantage of engineered timber products like glulam compared to solid wood? A. They are heavier B. They are less reliable C. Defects are distributed, improving strength and stability D. They absorb more moisture
Key Advantage
Practical Use
19. Reaction Wood
Which of the following best describes “reaction wood”? A. Wood that reacts strongly to fire B. Abnormal wood formed when a tree is leaning or stressed C. Wood treated with chemicals D. Wood grown in controlled conditions
20. Lowest Embodied Energy
According to sustainability data, which material has the lowest embodied energy and CO₂ emissions? A. Concrete B. Steel C. Wood D. Aluminium
Congratulations!
You’ve completed the 20-question timber quiz. Review your answers to reinforce your knowledge and prepare for using timber safely and sustainably in civil engineering projects.
Write down 3 things you learned in this lesson.
Write down 2 things you want to know more about.
Ask 1 question about something you haven't quite understood yet.