I WANT THE ANSWER, PAGE NUMBER AND TABLE / SECTION.
BEFORE WE APPLY DIVERSITY, WHAT IS THE MINIMUM WATTAGE LAMP ASSUMED PER LAMPHOLDER?
100 WATTS, PAGE 136, APPENDIX A, TABLE A1
WHAT PERCENTAGE OF DIVERSITY CAN WE APPLY TO A COOKER CIRCUIT?
30%, PAGE 137, APPENDIX A, TABLE A2
WHAT SIZE CABLE DO WE USE IN AN A2 SOCKET OUTLET?
4mm, PAGE 210, APPENDIX H, TABLE H2.1
IN A SMALL HOTEL WHAT PERCENTAGE OF DIVERSITY CAN WE APPLY TO A LIGHTING CIRCUIT?
75%, PAGE 137, APPENDIX A, TABLE A2
WHAT COLOUR IS A NEUTRAL CONDUCTOR IDENTIFIED AS IN AN AC CIRCUIT?
BLUE, PAGE 226, APPENDIX K, TABLE K1
I WANT THE ANSWER, PAGE NUMBER AND TABLE / SECTION.
BEFORE WE APPLY DIVERSITY, WHAT IS THE MINIMUM WATTAGE LAMP ASSUMED PER LAMPHOLDER?
100 WATTS, PAGE 136, APPENDIX A, TABLE A1
WHAT PERCENTAGE OF DIVERSITY CAN WE APPLY TO A COOKER CIRCUIT?
30%, PAGE 137, APPENDIX A, TABLE A2
WHAT SIZE CABLE DO WE USE IN AN A2 SOCKET OUTLET?
4mm, PAGE 210, APPENDIX H, TABLE H2.1
IN A SMALL HOTEL WHAT PERCENTAGE OF DIVERSITY CAN WE APPLY TO A LIGHTING CIRCUIT?
75%, PAGE 137, APPENDIX A, TABLE A2
WHAT COLOUR IS A NEUTRAL CONDUCTOR IDENTIFIED AS IN AN AC CIRCUIT?
BLUE, PAGE 226, APPENDIX K, TABLE K1
This item has no instructions
How is electricity Generated?
How does electricity get to your house?
This item has no instructions
Choose TWO methods of generating electricity. Give one advantage and one disadvantage of each.
This item has no instructions
Learning objectives
Identify the UK transmission and distribution voltages.
Describe the journey of electricity from generation to the consumer.
This item has no instructions
Electricity supply industry
The electricity supply industry has three main parts:
generation
transmission
distribution
Electricity is produced first, moved across the country next, and then delivered to users at suitable voltages.
Use this as the lesson overview. Keep the three terms consistent throughout the lesson.
Step Up Transformer
This item has no instructions
Generation
Electricity is generated at power stations.
In the UK, power stations are often close to the fuel source.
They may also be near a large supply of cooling water.
Base-load power stations often generate at about 25 kV.
Base-load here means stations that provide a steady supply of electricity over long periods.
Step‑Up Transformer ⬆️
A step-up transformer increases voltage. Higher voltage reduces current, which decreases energy loss in transmission lines, making electricity travel more efficiently over long distances.
Electricity is stepped up to very high Transmission voltages such as 400 kV, 275 kV, and 132 kV
This item has no instructions
Transmission
This item has no instructions
Transmission
High transmission voltages are used to carry electricity over very long distances through cables supported by pylons, delivering the power to a substation at the destination
The conductors are generally made of a steel inner core for strength, surrounded by aluminium conductors around the outside; the cable has no insulation applied.
This item has no instructions
What is the correct order in the electricity supply industry?
Generation, transmission, distribution
Transmission, generation, distribution
Distribution, transmission, generation
Generation, distribution, transmission
Checks the three-part structure from the opening slides and the journey from power station to user.
From power station to the Grid
Electricity is generated at approximately 25KV at a power station. A Step up transformer is used to increase the voltage before the electricity enters the transmission network.
Typical transmission voltages include 400KV, 275 kV and 132 kV.
Using a high transmission voltage allows electrical energy to be transferred efficiently over long distances towards major load centres.
Overhead transmission conductors are normally supported by large structures known as pylons.
All three blanks come directly from the overview and early process slides.
Transmission line construction
A pylon normally carries two or three phase circuits.
Earth wires or guard wires are placed at the top.
They intercept lightning and divert it safely to ground.
Conductors usually have a steel core for strength with aluminium around the outside.
The transmission cable itself has no insulation applied.
Students may expect all electrical cables to be insulated. Emphasise that overhead conductors are separated from surroundings by air and height.
Step‑Down Transformers
This item has no instructions
Local distribution
When electricity reaches a load centre, such as a town or city, substations reduce the voltage for local distribution.
Electricity may be distributed at 33 kV and 11 kV around towns, cities and industrial areas.
The voltage is eventually reduced further so that electricity can be safely supplied to homes and businesses at 400v and 230v
This item has no instructions
Supply to different users
Commercial and industrial users commonly receive 400 V.
Domestic users receive 230 V.
Heavy industry may be supplied at 33 kV or 11 kV, depending on demand.
Clarify that larger users may take supply at higher voltages because of greater power demand.
Power stations
Power stations are where electricity is generated.
They are the starting point of the supply system.
Their output is sent onwards to the transmission network.
This item has no instructions
Transformers
Step-up transformers raise voltage for transmission.
Step-down transformers lower voltage for distribution and final supply.
They are essential at each stage where the voltage level changes.
This item has no instructions
Sub-stations
Sub-stations connect parts of the network.
They contain equipment for switching and transforming voltage.
Major sub-stations link the transmission and distribution systems.
This item has no instructions
Pylons and insulators
Pylons support overhead transmission lines.
Insulators hold the conductors in place.
Together, they keep high-voltage lines safely supported and separated from the tower structure.
This item has no instructions
Cables
Cables carry electrical energy through the network.
In overhead transmission, conductors are suspended from pylons.
The conductors commonly use a steel core with aluminium around it.
This item has no instructions
Network components together
Power stations generate electricity. Transformers change voltage. Pylons, insulators and cables carry electricity across the transmission system. Sub-stations connect sections of the network and help move supply from transmission into distribution.
This slide pulls the component list together as one system rather than isolated parts.
Fill in the blanks
Select a word to generate electrical energy.
Transformers are used to increase or decrease the voltage.
Pylons support overhead transmission cables, while insulators prevent the electrical conductors from making electrical contact with the supporting structure.
Cables carry the electrical energy across the transmission system.
Substations connect different parts of the network and allow electricity to move from the transmission system into the distribution system. create your first fill in the blanks word
This item has no instructions
Knowledge check
This item has no instructions
Write a short story explaining your journey from being generated at a power station to reaching a house.
This item has no instructions
Generation voltage 25KV (25000V)
Step‑up transformers increase the voltage produced at power stations to Transmission Voltages so electricity can travel long distances with lower energy losses.
The UK transmission voltages are 400 kV, 275 kV and 132 kV across the country.
Step‑down transformers reduce these high voltages to Distribution Voltages that are safer levels so electricity can be used by towns, businesses and homes.
Distribution voltages in the UK are typically 33 kV, 11 kV depending on the demand and finally 230/400 V for end‑user supply.
Key points:
This item has no instructions
Journey so far!
This item has no instructions