Shampoo, Condition & Treat Hair

Shampoo, Condition & Treat Hair

1 / 56
next
Slide 1: Slide
New lesson editorHairdressing & BarberingFurther Education (Key Stage 5)

This lesson contains 56 slides, with interactive quizzes and text slides.

Report this lesson

Items in this lesson

Shampoo, Condition & Treat Hair

This is a revision lesson for Level 2 Hairdressing and Barbering, focused on exam preparation in shampooing, conditioning and scalp treatment.

Learning goal

You will be able to shampoo and condition the hair and scalp safely, choose suitable products for different hair and scalp conditions, and explain the massage techniques and pH knowledge that support the service.

This item has no instructions

One word or phrase you link with good shampooing

Use this as prior knowledge activation. Expect responses such as clean, massage, rinse, scalp, pH, comfort, products or hygiene.

Preparing the client

  • Protect clothing with a gown, plastic cape and towels

  • Place the gown first, then protect the neck and shoulders

  • Do not tuck towels into necklines, as water can soak through

  • Check for earrings and necklaces and ask if the client wants to remove them

Different salons may vary slightly, but the key aim is full protection and client comfort before the service begins.

Gowning at the basin

For a shampoo service, a common method is:

  • Place a clean towel around the neck and shoulders

  • Put on the gown and fasten it behind the neck

  • Add a second towel over the tied gown

  • Clip the towel if needed so it stays secure

Mention that salons may use branded gowns and slightly different systems, but the principles remain the same: hygiene, protection and security.

Preparing the hair

  • Hair should be free from tangles before shampooing

  • Use a wide-toothed comb or suitable bristle brush

  • Start at the nape and points, then work towards the roots

  • Gradually move closer to the scalp and towards the front

  • Remove tangles gently without causing discomfort

During this stage, check the scalp for contra-indications and confirm the consultation decision before proceeding.

What should you avoid doing with towels during gowning?

A

Tucking into necklines

B

Clipping at the back

C

Placing on shoulders

D

Using a clean towel

Checks key client-protection detail from the preparation slides.

Technical service gowning

A technical service includes services such as:

  • Perms

  • Tints

  • Highlights

  • Semi-permanent or quasi-permanent colour


For these services, salons usually use chemical-resistant gowns and often dark towels to reduce visible staining.

Emphasise that chemical services need extra protection because products may stain or irritate if they contact clothing or skin unnecessarily.

Preparation and safety check

Before shampooing, protect the client with a gown, cape and towels. Hair should be free from tangles, and jewellery should be checked before starting. At the basin, keep control of the water so it does not run onto the face or clothing.

gown
tangles
water
conditioner
knots
spray
brush
shampoo

All three blanks come directly from the client preparation and health and safety block.

Why shampooing matters

Shampooing is not just washing hair. It helps to:

  • Cleanse the hair and scalp

  • Stimulate blood supply

  • Relax the client

  • Prepare the hair for treatment

  • Remove products such as tints and bleach residues

Stress that shampooing is often the first hands-on service a client receives, so it shapes their view of the whole salon.

Choosing shampoo well

  • Use a good quality, acid-balanced shampoo

  • Match ingredients to the client's hair type and scalp condition

  • Cheap shampoos may need more product to clean effectively

  • Poor-quality products can leave hair dry and may irritate the hands

Draw attention to the idea that product choice is part of professional judgement, not just routine habit.

Preparation before shampooing

The main preparation stages are:

  • Greet the client and protect clothing

  • Ask about removing jewellery if needed

  • Carry out a consultation in the styling position

  • Confirm the service

  • Brush or comb to detangle the hair

  • Select the correct shampoo

Keep the sequence clear, as exam questions often focus on correct order and purpose.

Main stages of shampooing

  • Check the client and operator are correctly positioned

  • Test the water temperature on the back of your hand

  • Ask the client if the temperature feels comfortable

  • Wet the hair thoroughly to the scalp

  • Keep the spray head close to the hair for control

If mixing water manually, turn on cold first and then add hot. This reduces the risk of water being too hot at first flow.

Main stages of shampooing

  • Turn off the water before putting the spray head down

  • Measure shampoo into the palm of the hand

  • Do not squirt shampoo directly onto the hair

  • Spread the shampoo between both hands

  • Apply using effleurage

Students often forget the product control point: measured product reduces waste and gives more even application.

Main stages of shampooing

  • Massage the shampoo through the hair and scalp

  • Cover all areas of the head evenly

  • Do not scratch the scalp

  • Rinse thoroughly

  • Repeat if needed, making sure the final rinse is complete

This is a good point to remind students that incomplete rinsing can affect the finish of later services.

Where should you test the water temperature?

A

On the wrist

B

On the forehead

C

On the back of your hand

D

On the shampoo bottle

Distractors reflect common unsafe guesses.

Main stages of shampooing

First, wet the hair thoroughly to the scalp. Measure shampoo into the palm of your hand and spread it before application. Finish by rinsing well and making sure the final rinse is complete.

scalp
palm
rinse
roots
bottle
massage
spray
comb

Reinforces sequence and product control from the shampooing method slides.

What shampoo is made of

Most shampoos contain:

  • Water

  • Surfactants


Modern shampoos are soap-free detergents. Their basic job is cleansing, but added ingredients make them suitable for different hair and scalp needs.

Use the term surfactant clearly, as it links directly to how cleansing works.

Health and safety at the basin

  • Check the client is comfortable and well supported

  • Protect clothes, skin and jewellery before starting

  • Avoid pulling the hair or scratching the scalp

  • Keep control of water so it does not run onto the face or clothing

  • Work hygienically and avoid wasting product or hot water

Link this slide to exam language around client care, safe working methods and professional standards.

Added ingredients and purpose

Examples of added ingredients include:

  • Piroctone Olamine or Zinc Pyrithione for dandruff shampoos

  • D-Panthenol for dry hair shampoos


The extra ingredients give the shampoo a more specific purpose than basic cleansing alone.

You can connect this to salon retail knowledge: ingredients help justify product recommendations to clients.

Pre-perm shampoo choice

Before a perm, use a clear, basic shampoo with no conditioning ingredients.


Conditioning agents can create a barrier and may reduce how well the lotion enters the hair. Some shampoos are made specifically for pre-perm use.

This slide is about matching product choice to the next service, not just current hair condition.

How shampoo cleans

Shampoo works because surfactant molecules have two parts:

  • A tail that attaches to grease

  • A head that stays in water


This allows grease to be lifted from the hair and scalp so it can be rinsed away.

Keep the science simple and visual: grease-loving tail, water-friendly head.

Name one safety check before or during shampooing.

Expected elements: protect clothing, ask about jewellery, consult first, detangle gently, test water temperature, avoid scratching scalp, control water, avoid waste, keep client comfortable.

How shampoo cleans

Grease on hair → surfactant tails attach to grease → heads stay in water → grease forms tiny droplets → water rinses the emulsion away


Shampoo also helps water spread more easily by reducing surface tension.

This causal chain is worth reading aloud slowly so students can follow the process step by step.

Why is a basic shampoo used before a perm?

A

It smells stronger

B

It adds more shine

C

It thickens fine hair

D

It avoids a conditioning barrier

Tests application of product choice, not just recall of ingredients.

How shampoo cleans

Shampoo contains surfactants with tails that attach to grease. Their heads stay in water, so the dirt can be rinsed away as an emulsion.

surfactants
grease
water
cuticles
oil glands
conditioner
air
protein

Focus on the cleansing mechanism and the key science vocabulary.

Effleurage and rotary

  • Effleurage: gentle stroking with fingertips and palms to apply and spread shampoo or conditioner evenly

  • Rotary: deep circular movement using finger pads to cleanse the scalp thoroughly and comfortably

Effleurage is used before more vigorous cleansing begins. Rotary should follow a clear pattern so no area is missed.

Friction and petrissage

  • Friction: quick, deep rubbing with the pads of the fingers to stimulate the scalp, usually during shampooing

  • Petrissage: strong deep movement used during conditioning to stimulate blood circulation


Contact with the scalp should be maintained throughout the movement.

Clarify the service link: friction is linked to shampooing; petrissage is linked to conditioning.

Massage techniques

Four key massage techniques are used in shampooing and conditioning:

  • Effleurage

  • Rotary

  • Friction

  • Petrissage


Each one has a different action and purpose.

Students should learn both the definitions and when each movement is most appropriate.

Massage pattern and comfort

A useful massage pattern is:

front → crown → occipital → nape → around the ears → temple → front


Use upward circular movements and repeat the pattern evenly.


Always check that the client feels comfortable and relaxed.

Mention that supporting the client's head during brushing or massage helps prevent neck strain and improves comfort.

Which massage movement is mainly used during conditioning?

A

Rotary

B

Petrissage

C

Friction

D

Effleurage only

Students often confuse friction and petrissage, so both appear as plausible options.

Which massage term do you still want to practise most?

1

Effleurage

2

Rotary

3

Friction

4

Petrissage

This item has no instructions

Massage recap

A common massage pattern moves from the front to the crown, then to the occipital and nape. Throughout the service, the client should feel comfortable and relaxed.

front
nape
comfortable
ends
roots
tense
temple
scalp

Anchors both the practical pattern and client-care focus.

Reasons for conditioning

Conditioning helps to:

  • Lubricate the hair for easier detangling

  • Smooth the cuticle

  • Equalise porosity

  • Moisturise the hair

  • Add shine

  • Reduce the pH of the hair

This slide links directly to later pH content and to selecting conditioners for hair needs.

Applying conditioner well

  • Apply conditioner where it is needed most

  • If the scalp is greasy but the ends are porous, keep product on the ends

  • Allow time for the product to penetrate the cuticle layers

  • Rinse thoroughly after the recommended time

Especially after chemical services or on very porous hair, extra development time can improve the effect.

Types of conditioner

The three main types are:

  • Surface or balsam conditioner

  • Deep acting or treatment conditioner

  • Restructurant


They differ in weight, action and the hair types they suit best.

Set up the next slides as a comparison between product types and uses.

Surface conditioner

Most surface conditioners contain:

  • Water

  • A lubricator

  • An organic acid

  • A moisturiser


They are designed mainly to close the cuticle, soften the hair and improve the surface feel.

You can mention that different mixing methods and added ingredients change consistency and purpose, even when the base is similar.

Deep acting conditioner

  • Best for coarse, damaged or very curly hair

  • Usually too heavy for very fine hair

  • Has a heavier creamy consistency

  • Can penetrate an open cuticle and help fill damaged areas

  • Usually left on for 5 to 10 minutes before rinsing

Explain that heavy products can leave fine hair flat, greasy or difficult to style.

Restructurant

  • A very lightweight liquid conditioner

  • Penetrates the hair through the cuticle layers like water

  • Left in the hair after application

  • Affects damaged areas rather than healthy areas

  • Useful for detangling and pre-perm preparation

Emphasise that restructurant gives shine overall but works most where the hair is damaged.

Main stages of conditioning

For a surface conditioner:

  • Squeeze out excess moisture

  • Spread product in the palms

  • Apply from root to point using effleurage

  • Gently massage and comb through with a wide-tooth comb

  • Leave for up to 5 minutes, re-massage, then rinse and towel dry

Keep students focused on sequence and method, especially product distribution and combing through evenly.

Main stages of conditioning

For a deep acting conditioner:

  • Squeeze out excess moisture

  • Apply evenly through the hair

  • Use effleurage and petrissage for a fuller massage

  • Leave on for several minutes

  • Comb through, re-massage, rinse well and towel dry

Stress the use of petrissage here, as this links product type to the correct massage technique.

Main stages of conditioning

For a restructurant:

  • Usually apply to towel-dried hair

  • Apply directly from the bottle or with a fine diffuser spray

  • Massage into the hair

  • Comb through for even distribution

  • It is generally left in the hair

This is the lightest application method, so contrast it clearly with rinse-out conditioners.

Which conditioner is usually too heavy for very fine hair?

A

Restructurant

B

Surface conditioner

C

Deep acting

D

Acid-balanced shampoo

Checks comparison of conditioner types.

Choosing the right conditioner

If the scalp is greasy but the ends are porous, apply conditioner mainly to the ends. A restructurant is often left in the hair after application.

porous
ends
in
dry
roots
out
scalp
fine

Applies conditioner choice and placement to a salon situation.

How would you choose a conditioner for one client?

Expected elements: deep acting for coarse, damaged or very curly hair; surface conditioner for lighter smoothing and cuticle closing; restructurant for damaged areas, detangling or pre-perm; keep product off greasy scalp if only ends need it.

Factors affecting hair condition

  • Disease and scalp disorders

  • Diet, drugs and pregnancy

  • Psychological factors such as tension, stress and worry

External factors

Internal factors

  • Heat: dryers, tongs

  • Mechanical: combing, brushing, backcombing

  • Atmospheric: sun, wind, very hot or cold conditions, dry air, pollution

  • Chemical: perming, tinting, bleaching, harsh shampoos

Use this slide to reinforce consultation: hair condition is not caused by products alone.

Treating dandruff

Dandruff is an over-production of skin cells on the scalp.


The cells collect faster than they can be removed, so flakes become visible even with regular shampooing. It can be linked with a dry scalp or a greasy scalp.

Keep the explanation simple: too many cells produced, then they stick together and show as flakes.

Dandruff care

For a greasy scalp:

  • Use a good quality shampoo, ideally for greasy scalp

  • Use tepid water

  • Apply a professional dandruff treatment

  • Massage firmly without scratching

  • Leave as directed, often about 5 minutes, then rinse well


For a dry scalp, the technique is similar but a re-moisturising scalp treatment is suitable.

Point out that dandruff usually needs repeated treatments over time, plus home care advice and professional product recommendation.

pH and hair products

  • The pH scale runs from 0 to 14

  • 7 is neutral

  • Below 7 is acid; above 7 is alkali

  • Hair-friendly products are usually acidic, often around pH 4 to 6

  • Shampoos, conditioners and treatments are generally around pH 3.5 to 6.9

  • Alkali products such as perms, tints and bleaches open the cuticle and can damage hair

  • After chemical treatments, use an acid product to help close the cuticle

Add the caution that products above about pH 9.5 can act like depilatories and may break down the hair. This is a key safety and science link for revision.

For dandruff with a greasy scalp, what water is best?

A

Tepid water

B

Very hot water

C

Ice-cold water

D

Boiled water

Targets a likely exam detail from dandruff care.

pH and scalp care

On the pH scale, 7 is neutral. Hair-friendly shampoos and conditioners are usually acidic, often around pH 4 to 6. After chemical services, an acid product helps close the cuticle.

7
acidic
4 to 6
5
alkaline
8 to 10
neutral
1 to 3

Links science knowledge to practical aftercare choice.

Which topic needs the most revision before your exam?

1

Conditioners

2

Massage

3

Dandruff care

4

pH knowledge

This item has no instructions

What is one thing you will remember from this lesson?

Reflection only. Invite students to name one practical idea, one science fact, or one safety point they will remember.

Which part of today's revision felt hardest?

Reflection only. Useful for planning recap or intervention before the exam.

What helped you understand this topic best today?

Reflection only. Encourage students to identify a helpful strategy, image, example or explanation from the lesson.

Glossary

effleurage - a gentle stroking movement used to spread shampoo or conditioner

rotary - a deep circular movement used to cleanse the scalp

friction - a quick deep rubbing movement using the pads of the fingers

petrissage - a strong stimulating movement used mainly during conditioning

surfactant - a cleansing ingredient that helps lift grease so it can be rinsed away

porosity - how easily the hair absorbs and holds moisture or products

pH - the measure of how acidic, neutral or alkaline a product is

This item has no instructions