Mastering Timber: 20 Question Quiz for CIV144

Mastering Timber: 20 Question Quiz

1 / 28
volgende
Slide 1: Slide
newEditor

In deze les zitten 28 slides, met interactieve quizzen en tekstslides.

Dit is niet oké

Onderdelen in deze les

Mastering Timber: 20 Question Quiz

What do you already know about using timber in civil engineering?

Learning Objective

At the end of the lesson you will confidently answer key questions about timber properties, classifications, and applications in civil engineering.

About This Quiz

This 20-question quiz covers vital timber concepts for CIV144, based on Harte (2009) and Materials in Construction. Test your knowledge on timber’s structure, properties, and sustainability!

1. Timber Categories

What are the two main categories of tree species used for timber production? A. Softwoods and hardwoods B. Conifers and pines C. Heartwood and sapwood D. Tropical and temperate

2. Function of the Cambium

In a tree cross-section, what is the function of the cambium? A. To store nutrients B. To produce new wood cells C. To protect the trunk from insects D. To provide structural support

3. Nutrient Storage Layer

Which layer of wood is primarily responsible for nutrient storage and transport? A. Heartwood B. Sapwood C. Cambium D. Bark

4. Anisotropic Nature

Timber is said to be anisotropic because: A. It has uniform properties in all directions B. Its strength is independent of grain direction C. Its properties vary with grain direction D. It is unaffected by moisture

5. Standard Moisture Content

Controlling indoor timber moisture is crucial for structural integrity and performance.

Civil Engineering Relevance

Typical Indoors

The moisture content of wood in a standard indoor environment is approximately: A. 6% B. 12% C. 25% D. 30%

6. Fibre Saturation Point

The fibre saturation point (FSP) in most species occurs at: A. 10–15% B. 25–35% C. 50% D. 70%

7. Moisture Loss Effects

Below the FSP, a reduction in moisture content generally causes timber to: A. Increase in volume B. Decrease in strength C. Increase in strength and stiffness D. Decay faster

8. Timber Shrinkage

Shrinkage in timber occurs most in which direction? A. Longitudinal B. Radial C. Tangential D. Parallel to grain

9. Softwood Density

Why Density Matters

Density affects strength, handling, and durability of structural timber.

What is the approximate density range for softwoods used in construction? A. 100–300 kg/m³ B. 400–650 kg/m³ C. 700–1000 kg/m³ D. 1100–1500 kg/m³

Construction Use

10. Timber Insulation Advantage

Timber’s low thermal conductivity makes it a good: A. Electrical conductor B. Insulator C. Fire-resistant material D. Structural metal substitute

11. Tensile Strength Range

The tensile strength of softwoods parallel to the grain is typically within which range? A. 10–30 MPa B. 30–60 MPa C. 70–140 MPa D. 200–250 MPa

12. Impact of Knots

Knots in timber reduce strength because: A. They are areas of higher density B. They distort the grain direction C. They increase moisture absorption D. They contain excess sap

13. Visual vs Machine Grading

The main difference between visual and machine grading of timber is that: A. Visual grading uses machines to measure moisture content B. Machine grading directly measures mechanical properties C. Visual grading is always more accurate D. Machine grading assesses colour and appearance only

14. European Timber Strength Classes

A. Compressive and Density B. Coniferous and Deciduous C. Clear and Defective D. Core and Durable

What do C & D Stand for?

Timber Markings

C=Coniferous, D=Deciduous; key strength grades for construction.

15. Timber Sustainability

Timber can be described as a sustainable material because: A. It is non-renewable but long-lasting B. It captures and stores carbon dioxide C. It cannot decay D. It has the highest embodied energy

16. Engineered Timbers

Which engineered wood product consists of layers of veneers glued together? A. Oriented Strand Board (OSB) B. Glulam C. Plywood D. I-joist

17. Timber Char Rate

The char rate of softwoods during a fire is approximately: A. 0.1 mm/min B. 0.5 mm/min C. 1.0 mm/min D. 2.0 mm/min

18. Glulam Advantages

Distribution of defects increases predictability and performance for structures.

What is the key advantage of engineered timber products like glulam compared to solid wood? A. They are heavier B. They are less reliable C. Defects are distributed, improving strength and stability D. They absorb more moisture

Key Advantage

Practical Use

19. Reaction Wood

Which of the following best describes “reaction wood”? A. Wood that reacts strongly to fire B. Abnormal wood formed when a tree is leaning or stressed C. Wood treated with chemicals D. Wood grown in controlled conditions

20. Lowest Embodied Energy

According to sustainability data, which material has the lowest embodied energy and CO₂ emissions? A. Concrete B. Steel C. Wood D. Aluminium

Congratulations!

You’ve completed the 20-question timber quiz. Review your answers to reinforce your knowledge and prepare for using timber safely and sustainably in civil engineering projects.

Write down 3 things you learned in this lesson.

Write down 2 things you want to know more about.

Ask 1 question about something you haven't quite understood yet.