GCSE Combined Science Physics 2: Power and Efficiency

A Q A C O M B I N E D S C I E N C E · P H Y S I C S

Power and Efficiency

Topic 1 Energy · Lesson 2

1 / 25
volgende
Slide 1: Slide
newEditorPhysicsUpper Secondary (Key Stage 4)GCSE

In deze les zitten 25 slides, met interactieve quizzen en tekstslides.

Dit is niet oké

Introductie

Students learn that power is the rate of energy transfer, calculate power, energy and time using P = E ÷ t, and identify useful and wasted energy before calculating efficiency as a decimal and a percentage. Foundation slides come first, followed by Higher slides on rearranging the efficiency equation and ways to increase efficiency. Written for AQA GCSE Combined Science Trilogy (6.1.1.4, 6.1.2.1 and 6.1.2.2), with a spec check for Edexcel, OCR Gateway and CCEA Double Award. This lesson was created with AI assistance.

Onderdelen in deze les

A Q A C O M B I N E D S C I E N C E · P H Y S I C S

Power and Efficiency

Topic 1 Energy · Lesson 2

Physics Lesson 2 of the GCSE Combined Science series. Written for AQA Combined Science Trilogy 8464, sections 6.1.1.4 (Power), 6.1.2.1 (Energy transfers in a system) and 6.1.2.2 (Efficiency), Physics Paper 1.

Structure: 01 Hook, 02 Learn, 03 Check (including the Professor), 04 Go Higher (pink HIGHER badge), 05 Apply and Review. Foundation groups can stop before section 04.

Every question is taught on the slide just before it, and the trickier ones are followed by an "answers explained" slide. Students need calculators.

0 1 / H O O K

Kettle A boils the water in 2 minutes, kettle B in 4. Which is more powerful?

1

Kettle A (2 minutes)

2

Kettle B (4 minutes)

3

They are the same

4

Not sure

P H Y S I C S

Take a vote and use the spinner to hear a few reasons.

Both kettles transfer the same amount of energy to the water - the faster one does it in half the time, so it has twice the power. The next slide reveals this.

0 1 / H O O K

The faster one!

Both kettles give the water the same amount of energy.

The 2-minute kettle does it in half the time, so it is twice as powerful.

Power tells you how fast energy is transferred. Today you will learn to calculate it - and to work out how much energy is wasted.

P H Y S I C S

Link back to the hook vote. Power is not "how much energy" but "how fast". Keep this kettle in mind - the exit ticket comes back to it.

T O D A Y ' S G O A L S

By the end of the lesson

Foundation

  • I can calculate power using P = E ÷ t, in watts.

  • I can describe useful and wasted energy, and how to reduce wasted energy.

  • I can calculate efficiency as a decimal and a percentage.

Higher

  • I can rearrange the efficiency equation and describe ways to increase efficiency.

P H Y S I C S

Share the goals. Foundation goals are for everyone; the Higher goal is covered in section 04.

0 2 / L E A R N

What is power?

Power is the rate at which energy is transferred - how much energy every second.

P = E ÷ t

P = power in watts (W) · E = energy transferred in joules (J) · t = time in seconds (s)

1 watt = 1 joule every second.

Worked example: a kettle transfers 180 000 J in 60 s. P = 180 000 ÷ 60 = 3000 W

P H Y S I C S

AQA 6.1.1.4. Students must recall P = E ÷ t and P = W ÷ t (work done is the same as energy transferred - work done comes up again in the forces topic).

Ask: what does a 60 W lamp do every second? (Transfers 60 J.)

0 3 / C H E C K

A lamp transfers 600 J of energy in 10 s. What is its power?

A

6000 W

B

60 W

C

6 W

D

610 W

Answer: 60 W. P = E ÷ t = 600 ÷ 10 = 60 W. 6000 W means the student multiplied; 610 W means they added.

0 2 / L E A R N

Kilowatts, minutes and energy

Before you use the equation, put everything in the right units.

1 kilowatt (kW) = 1000 W · 1 minute = 60 s

To find the energy, rearrange: E = P × t

Worked example: a 2 kW heater is on for 5 minutes.

P = 2 × 1000 = 2000 W · t = 5 × 60 = 300 s

E = 2000 × 300 = 600 000 J

P H Y S I C S

Teaches the unit changes and the rearrangement needed for the next question. The most common error is leaving the time in minutes.

0 3 / C H E C K

A 1.5 kW hairdryer is used for 2 minutes. How much energy does it transfer?

A

3 J

B

180 J

C

3000 J

D

180 000 J

Answer: 180 000 J. P = 1500 W, t = 120 s, E = 1500 × 120 = 180 000 J. 3 J uses kW and minutes; 180 J changes the time but not the power; 3000 J changes the power but not the time.

T H E A N S W E R S E X P L A I N E D

How did we get those?

Lamp: P = E ÷ t = 600 ÷ 10 = 60 W. Energy divided by time - never multiplied.

Hairdryer: change the units first. 1.5 kW = 1500 W and 2 minutes = 120 s.

E = P × t = 1500 × 120 = 180 000 J

Got 3 J? You used kW and minutes. Always change to watts and seconds first.

P H Y S I C S

Go through both answers after the class has voted. Ask anyone who chose 3 J or 3000 J which step they missed.

0 2 / L E A R N

Useful and wasted energy

A device transfers energy to useful stores - the ones it is designed for - and to wasted stores.

Wasted energy is dissipated: it spreads out into the surroundings, usually as thermal energy, and sometimes as sound.

A TV: useful = light and sound · wasted = thermal (it gets warm)

A car engine: useful = kinetic · wasted = thermal and sound

Reduce waste: lubricate moving parts (less friction) and use thermal insulation (less heat lost).

P H Y S I C S

AQA 6.1.2.1. "Useful" depends on what the device is for - sound is useful from a TV but wasted from a car engine. That is the key to the next activity.

Energy is not destroyed when it is wasted - it is still there, just spread out where it is not useful.


Useful or wasted? Drag each energy transfer

USEFUL

WASTED

Thermal energy from a phone charger

Kinetic energy of a fan's blades

Sound from a fan's motor

Thermal energy in a kettle's water

Thermal energy from a lamp

Light from a lamp

P H Y S I C S

Useful: kinetic energy of a fan's blades; thermal energy in a kettle's water; light from a lamp. Wasted: thermal energy from a phone charger; sound from a fan's motor; thermal energy from a lamp.

Ask: why is thermal energy useful for the kettle but wasted for the lamp? (It depends on what the device is for.)

0 2 / L E A R N

Efficiency

Efficiency tells you how much of the energy put in comes out as useful energy.

efficiency = useful output energy ÷ total input energy

Multiply by 100 to give a percentage.

Worked example: a lamp is given 200 J and gives out 50 J of light.

efficiency = 50 ÷ 200 = 0.25 = 25%

The useful output can never be bigger than the input, so efficiency is never more than 1 (100%).

P H Y S I C S

AQA 6.1.2.2. Students must recall both forms of the efficiency equation - with energy, and with power (useful power output ÷ total power input).

Efficiency has no unit. Watch for students dividing the wrong way round and getting more than 100% - that is the Professor's mistake on the next slides.

0 3 / C H E C K

A motor is given 500 J of energy and transfers 400 J usefully. What is its efficiency?

A

20%

B

125%

C

80%

D

0.8%

Answer: 80%. 400 ÷ 500 = 0.8 = 80%. 125% means the student divided the wrong way round (500 ÷ 400); 20% is the wasted fraction; 0.8% forgets to multiply by 100.

0 3 / C H E C K

"My new motor is 120% efficient - it gives out more energy than I put in!" Is the Professor right? Explain your answer.

T H E P R O F E S S O R S A Y S . . .

P H Y S I C S

The Professor's misconception, as an open question - students type their answers. The animation shows his efficiency gauge swinging past 100% into the red.

He is wrong: energy cannot be created or destroyed (conservation of energy, from Lesson 1), so a motor can never give out more energy than it is given. No device can be more than 100% efficient - and real motors are always less, because some energy is wasted as thermal energy and sound. He has probably divided the wrong way round (input ÷ output).

Look for: "energy cannot be created", "conservation of energy", "never more than 100%", "wasted", "dissipated".

T H E A N S W E R E X P L A I N E D

Sorry, Professor!

Energy cannot be created, so no motor can give out more energy than it is given. Nothing is more than 100% efficient.

Real motors are always less than 100% efficient: some energy is wasted as thermal energy and sound from friction.

He probably divided the wrong way round. It is always useful output ÷ total input.

P H Y S I C S

Go through this after students have typed their answers. Ask someone who got it right to explain it before revealing this slide.

Wasted energy and efficiency

Energy that is not useful is wasted. It spreads out into the surroundings, usually as thermal energy - we say it is dissipated. Lubricating moving parts reduces wasted energy because it reduces friction. Efficiency = useful output energy ÷ total input energy. No device can be more than 100% efficient.

wasted
thermal
dissipated
friction
input
100
destroyed
created
120
power

P H Y S I C S

A recap of the last four slides. The distractors "destroyed" and "120" test the Professor's misconceptions.

S P E C C H E C K

Your exam spec

Power and efficiency are in every specification.

AQA Combined Science Trilogy (8464) - 6.1.1.4 Power, 6.1.2.1 Energy transfers in a system and 6.1.2.2 Efficiency, Physics Paper 1. Learn P = E ÷ t and both efficiency equations.

Edexcel Combined Science (1SC0) - Topic 3 Conservation of energy (efficiency) and Topic 8 Energy - forces doing work (power)

OCR Gateway Combined Science (J250) - Energy, including power and efficiency

CCEA Double Award Science (NI) - Physics, energy, work and power

P H Y S I C S

A variant slide for classes on other specifications. The core content is shared, but topic numbers, which equations are given on the formula sheet, and whether "ways to increase efficiency" is Higher-only can differ - check your specification and its equation sheet before teaching.

Delete this slide if your class only sits AQA.

0 4 / G O H I G H E R

Rearranging efficiency

Efficiency works with power too: efficiency = useful power output ÷ total power input

Finding the useful output: useful = efficiency × total input. A 40% efficient motor with 250 W input: 0.4 × 250 = 100 W

Finding the input: total input = useful ÷ efficiency. A 50% efficient lamp gives 30 W of light: 30 ÷ 0.5 = 60 W

To increase efficiency: lubricate moving parts, use thermal insulation, and streamline moving objects to cut air resistance.

Always change a percentage to a decimal first: 40% = 0.4.

P H Y S I C S

HIGHER

Higher slide. In AQA Combined Science, describing ways to increase the efficiency of an intended energy transfer is Higher tier only (6.1.2.2).

Teaches both rearrangements and the efficiency improvements needed for the next two questions.

0 4 / G O H I G H E R

A kettle is 80% efficient and gives 1800 W of useful power. What is its input power?

HIGHER

A

1440 W

B

2250 W

C

1880 W

D

144 000 W

Answer: 2250 W. Total input = useful ÷ efficiency = 1800 ÷ 0.8 = 2250 W. 1440 W multiplies instead of divides; 144 000 W multiplies by 80 instead of dividing by 0.8; 1880 W adds the 80.

0 4 / G O H I G H E R

Which change would increase the efficiency of an electric motor?

HIGHER

A

Running it for longer

B

Using a bigger power supply

C

Lubricating its moving parts

D

Making it heavier

Answer: lubricating its moving parts. This reduces friction, so less energy is wasted as thermal energy and sound. Running it longer or giving it more power transfers more energy, but the same fraction is still wasted.

T H E A N S W E R S E X P L A I N E D

How did we get those?

Kettle: we know the useful power and want the input, so total input = useful ÷ efficiency.

80% = 0.8, so 1800 ÷ 0.8 = 2250 W. Check: the input must be bigger than the useful output.

Motor: lubrication reduces friction, so less energy is wasted as thermal energy and sound. A bigger supply or a longer run transfers more energy, but the same fraction is still wasted.

P H Y S I C S

HIGHER

Talk through both Higher answers. The "input must be bigger than the output" check catches most rearranging errors.

0 5 / A P P L Y & R E V I E W

Exam practice

Question

A TV transfers 6000 J of energy in 50 s.

Calculate the power of the TV. [2 marks]

Working space

Model answer

Key takeaway

Power = energy ÷ time. Give the answer in watts, W.

P H Y S I C S

FOUNDATION

Foundation exam question. One mark for correct substitution, one for the answer with unit.

0 5 / A P P L Y & R E V I E W

Exam practice

Question

An electric motor has an input power of 600 W and an efficiency of 0.75. It runs for 2 minutes.

Calculate the useful energy it transfers. [3 marks]

Working space

Model answer

Key takeaway

Find the useful power first, change minutes to seconds, then E = P × t.

P H Y S I C S

HIGHER

Higher exam question. Accept the alternative route: total energy = 600 × 120 = 72 000 J, then useful = 0.75 × 72 000 = 54 000 J.

These are model points in the style of an AQA mark scheme, not an official mark scheme.

0 5 / A P P L Y & R E V I E W

Exit ticket: will a 2000 W or a 3000 W kettle boil the same water faster? Why?

P H Y S I C S

Exit ticket. Good answers: the 3000 W kettle, because it transfers more energy per second (3000 J every second compared with 2000 J), so the water gets the energy it needs to boil in less time.

Great work, scientists!

Next physics lesson - Physics 3, Specific heat capacity (including the required practical).