Shampoo, Condition & Treat Hair
Shampoo, Condition & Treat Hair
This is a revision lesson for Level 2 Hairdressing and Barbering, focused on exam preparation in shampooing, conditioning and scalp treatment.
Learning goal
You will be able to shampoo and condition the hair and scalp safely, choose suitable products for different hair and scalp conditions, and explain the massage techniques and pH knowledge that support the service.
Deze slide heeft geen instructies
One word or phrase you link with good shampooing
Use this as prior knowledge activation. Expect responses such as clean, massage, rinse, scalp, pH, comfort, products or hygiene.
Preparing the client
Protect clothing with a gown, plastic cape and towels
Place the gown first, then protect the neck and shoulders
Do not tuck towels into necklines, as water can soak through
Check for earrings and necklaces and ask if the client wants to remove them
Different salons may vary slightly, but the key aim is full protection and client comfort before the service begins.
Gowning at the basin
For a shampoo service, a common method is:
Place a clean towel around the neck and shoulders
Put on the gown and fasten it behind the neck
Add a second towel over the tied gown
Clip the towel if needed so it stays secure
Mention that salons may use branded gowns and slightly different systems, but the principles remain the same: hygiene, protection and security.
Preparing the hair
Hair should be free from tangles before shampooing
Use a wide-toothed comb or suitable bristle brush
Start at the nape and points, then work towards the roots
Gradually move closer to the scalp and towards the front
Remove tangles gently without causing discomfort
During this stage, check the scalp for contra-indications and confirm the consultation decision before proceeding.
What should you avoid doing with towels during gowning?
Tucking into necklines
Clipping at the back
Placing on shoulders
Using a clean towel
Checks key client-protection detail from the preparation slides.
Technical service gowning
A technical service includes services such as:
Perms
Tints
Highlights
Semi-permanent or quasi-permanent colour
For these services, salons usually use chemical-resistant gowns and often dark towels to reduce visible staining.
Emphasise that chemical services need extra protection because products may stain or irritate if they contact clothing or skin unnecessarily.
Preparation and safety check
Before shampooing, protect the client with a gown, cape and towels. Hair should be free from tangles, and jewellery should be checked before starting. At the basin, keep control of the water so it does not run onto the face or clothing.
All three blanks come directly from the client preparation and health and safety block.
Why shampooing matters
Shampooing is not just washing hair. It helps to:
Cleanse the hair and scalp
Stimulate blood supply
Relax the client
Prepare the hair for treatment
Remove products such as tints and bleach residues
Stress that shampooing is often the first hands-on service a client receives, so it shapes their view of the whole salon.
Choosing shampoo well
Use a good quality, acid-balanced shampoo
Match ingredients to the client's hair type and scalp condition
Cheap shampoos may need more product to clean effectively
Poor-quality products can leave hair dry and may irritate the hands
Draw attention to the idea that product choice is part of professional judgement, not just routine habit.
Preparation before shampooing
The main preparation stages are:
Greet the client and protect clothing
Ask about removing jewellery if needed
Carry out a consultation in the styling position
Confirm the service
Brush or comb to detangle the hair
Select the correct shampoo
Keep the sequence clear, as exam questions often focus on correct order and purpose.
Main stages of shampooing
Check the client and operator are correctly positioned
Test the water temperature on the back of your hand
Ask the client if the temperature feels comfortable
Wet the hair thoroughly to the scalp
Keep the spray head close to the hair for control
If mixing water manually, turn on cold first and then add hot. This reduces the risk of water being too hot at first flow.
Main stages of shampooing
Turn off the water before putting the spray head down
Measure shampoo into the palm of the hand
Do not squirt shampoo directly onto the hair
Spread the shampoo between both hands
Apply using effleurage
Students often forget the product control point: measured product reduces waste and gives more even application.
Main stages of shampooing
Massage the shampoo through the hair and scalp
Cover all areas of the head evenly
Do not scratch the scalp
Rinse thoroughly
Repeat if needed, making sure the final rinse is complete
This is a good point to remind students that incomplete rinsing can affect the finish of later services.
Where should you test the water temperature?
On the wrist
On the forehead
On the back of your hand
On the shampoo bottle
Distractors reflect common unsafe guesses.
Main stages of shampooing
First, wet the hair thoroughly to the scalp. Measure shampoo into the palm of your hand and spread it before application. Finish by rinsing well and making sure the final rinse is complete.
Reinforces sequence and product control from the shampooing method slides.
What shampoo is made of
Most shampoos contain:
Water
Surfactants
Modern shampoos are soap-free detergents. Their basic job is cleansing, but added ingredients make them suitable for different hair and scalp needs.
Use the term surfactant clearly, as it links directly to how cleansing works.
Health and safety at the basin
Check the client is comfortable and well supported
Protect clothes, skin and jewellery before starting
Avoid pulling the hair or scratching the scalp
Keep control of water so it does not run onto the face or clothing
Work hygienically and avoid wasting product or hot water
Link this slide to exam language around client care, safe working methods and professional standards.
Added ingredients and purpose
Examples of added ingredients include:
Piroctone Olamine or Zinc Pyrithione for dandruff shampoos
D-Panthenol for dry hair shampoos
The extra ingredients give the shampoo a more specific purpose than basic cleansing alone.
You can connect this to salon retail knowledge: ingredients help justify product recommendations to clients.
Pre-perm shampoo choice
Before a perm, use a clear, basic shampoo with no conditioning ingredients.
Conditioning agents can create a barrier and may reduce how well the lotion enters the hair. Some shampoos are made specifically for pre-perm use.
This slide is about matching product choice to the next service, not just current hair condition.
How shampoo cleans
Shampoo works because surfactant molecules have two parts:
A tail that attaches to grease
A head that stays in water
This allows grease to be lifted from the hair and scalp so it can be rinsed away.
Keep the science simple and visual: grease-loving tail, water-friendly head.
Name one safety check before or during shampooing.
Expected elements: protect clothing, ask about jewellery, consult first, detangle gently, test water temperature, avoid scratching scalp, control water, avoid waste, keep client comfortable.
How shampoo cleans
Grease on hair → surfactant tails attach to grease → heads stay in water → grease forms tiny droplets → water rinses the emulsion away
Shampoo also helps water spread more easily by reducing surface tension.
This causal chain is worth reading aloud slowly so students can follow the process step by step.
Why is a basic shampoo used before a perm?
It smells stronger
It adds more shine
It thickens fine hair
It avoids a conditioning barrier
Tests application of product choice, not just recall of ingredients.
How shampoo cleans
Shampoo contains surfactants with tails that attach to grease. Their heads stay in water, so the dirt can be rinsed away as an emulsion.
Focus on the cleansing mechanism and the key science vocabulary.
Effleurage and rotary
Effleurage: gentle stroking with fingertips and palms to apply and spread shampoo or conditioner evenly
Rotary: deep circular movement using finger pads to cleanse the scalp thoroughly and comfortably
Effleurage is used before more vigorous cleansing begins. Rotary should follow a clear pattern so no area is missed.
Friction and petrissage
Friction: quick, deep rubbing with the pads of the fingers to stimulate the scalp, usually during shampooing
Petrissage: strong deep movement used during conditioning to stimulate blood circulation
Contact with the scalp should be maintained throughout the movement.
Clarify the service link: friction is linked to shampooing; petrissage is linked to conditioning.
Massage techniques
Four key massage techniques are used in shampooing and conditioning:
Effleurage
Rotary
Friction
Petrissage
Each one has a different action and purpose.
Students should learn both the definitions and when each movement is most appropriate.
Massage pattern and comfort
A useful massage pattern is:
front → crown → occipital → nape → around the ears → temple → front
Use upward circular movements and repeat the pattern evenly.
Always check that the client feels comfortable and relaxed.
Mention that supporting the client's head during brushing or massage helps prevent neck strain and improves comfort.
Which massage movement is mainly used during conditioning?
Rotary
Petrissage
Friction
Effleurage only
Students often confuse friction and petrissage, so both appear as plausible options.
Which massage term do you still want to practise most?
Effleurage
Rotary
Friction
Petrissage
Deze slide heeft geen instructies
Massage recap
A common massage pattern moves from the front to the crown, then to the occipital and nape. Throughout the service, the client should feel comfortable and relaxed.
Anchors both the practical pattern and client-care focus.
Reasons for conditioning
Conditioning helps to:
Lubricate the hair for easier detangling
Smooth the cuticle
Equalise porosity
Moisturise the hair
Add shine
Reduce the pH of the hair
This slide links directly to later pH content and to selecting conditioners for hair needs.
Applying conditioner well
Apply conditioner where it is needed most
If the scalp is greasy but the ends are porous, keep product on the ends
Allow time for the product to penetrate the cuticle layers
Rinse thoroughly after the recommended time
Especially after chemical services or on very porous hair, extra development time can improve the effect.
Types of conditioner
The three main types are:
Surface or balsam conditioner
Deep acting or treatment conditioner
Restructurant
They differ in weight, action and the hair types they suit best.
Set up the next slides as a comparison between product types and uses.
Surface conditioner
Most surface conditioners contain:
Water
A lubricator
An organic acid
A moisturiser
They are designed mainly to close the cuticle, soften the hair and improve the surface feel.
You can mention that different mixing methods and added ingredients change consistency and purpose, even when the base is similar.
Deep acting conditioner
Best for coarse, damaged or very curly hair
Usually too heavy for very fine hair
Has a heavier creamy consistency
Can penetrate an open cuticle and help fill damaged areas
Usually left on for 5 to 10 minutes before rinsing
Explain that heavy products can leave fine hair flat, greasy or difficult to style.
Restructurant
A very lightweight liquid conditioner
Penetrates the hair through the cuticle layers like water
Left in the hair after application
Affects damaged areas rather than healthy areas
Useful for detangling and pre-perm preparation
Emphasise that restructurant gives shine overall but works most where the hair is damaged.
Main stages of conditioning
For a surface conditioner:
Squeeze out excess moisture
Spread product in the palms
Apply from root to point using effleurage
Gently massage and comb through with a wide-tooth comb
Leave for up to 5 minutes, re-massage, then rinse and towel dry
Keep students focused on sequence and method, especially product distribution and combing through evenly.
Main stages of conditioning
For a deep acting conditioner:
Squeeze out excess moisture
Apply evenly through the hair
Use effleurage and petrissage for a fuller massage
Leave on for several minutes
Comb through, re-massage, rinse well and towel dry
Stress the use of petrissage here, as this links product type to the correct massage technique.
Main stages of conditioning
For a restructurant:
Usually apply to towel-dried hair
Apply directly from the bottle or with a fine diffuser spray
Massage into the hair
Comb through for even distribution
It is generally left in the hair
This is the lightest application method, so contrast it clearly with rinse-out conditioners.
Which conditioner is usually too heavy for very fine hair?
Restructurant
Surface conditioner
Deep acting
Acid-balanced shampoo
Checks comparison of conditioner types.
Choosing the right conditioner
If the scalp is greasy but the ends are porous, apply conditioner mainly to the ends. A restructurant is often left in the hair after application.
Applies conditioner choice and placement to a salon situation.
How would you choose a conditioner for one client?
Expected elements: deep acting for coarse, damaged or very curly hair; surface conditioner for lighter smoothing and cuticle closing; restructurant for damaged areas, detangling or pre-perm; keep product off greasy scalp if only ends need it.
Factors affecting hair condition
Disease and scalp disorders
Diet, drugs and pregnancy
Psychological factors such as tension, stress and worry
External factors
Internal factors
Heat: dryers, tongs
Mechanical: combing, brushing, backcombing
Atmospheric: sun, wind, very hot or cold conditions, dry air, pollution
Chemical: perming, tinting, bleaching, harsh shampoos
Use this slide to reinforce consultation: hair condition is not caused by products alone.
Treating dandruff
Dandruff is an over-production of skin cells on the scalp.
The cells collect faster than they can be removed, so flakes become visible even with regular shampooing. It can be linked with a dry scalp or a greasy scalp.
Keep the explanation simple: too many cells produced, then they stick together and show as flakes.
Dandruff care
For a greasy scalp:
Use a good quality shampoo, ideally for greasy scalp
Use tepid water
Apply a professional dandruff treatment
Massage firmly without scratching
Leave as directed, often about 5 minutes, then rinse well
For a dry scalp, the technique is similar but a re-moisturising scalp treatment is suitable.
Point out that dandruff usually needs repeated treatments over time, plus home care advice and professional product recommendation.
pH and hair products
The pH scale runs from 0 to 14
7 is neutral
Below 7 is acid; above 7 is alkali
Hair-friendly products are usually acidic, often around pH 4 to 6
Shampoos, conditioners and treatments are generally around pH 3.5 to 6.9
Alkali products such as perms, tints and bleaches open the cuticle and can damage hair
After chemical treatments, use an acid product to help close the cuticle
Add the caution that products above about pH 9.5 can act like depilatories and may break down the hair. This is a key safety and science link for revision.
For dandruff with a greasy scalp, what water is best?
Tepid water
Very hot water
Ice-cold water
Boiled water
Targets a likely exam detail from dandruff care.
pH and scalp care
On the pH scale, 7 is neutral. Hair-friendly shampoos and conditioners are usually acidic, often around pH 4 to 6. After chemical services, an acid product helps close the cuticle.
Links science knowledge to practical aftercare choice.
Which topic needs the most revision before your exam?
Conditioners
Massage
Dandruff care
pH knowledge
Deze slide heeft geen instructies
What is one thing you will remember from this lesson?
Reflection only. Invite students to name one practical idea, one science fact, or one safety point they will remember.
Which part of today's revision felt hardest?
Reflection only. Useful for planning recap or intervention before the exam.
What helped you understand this topic best today?
Reflection only. Encourage students to identify a helpful strategy, image, example or explanation from the lesson.
Glossary
effleurage - a gentle stroking movement used to spread shampoo or conditioner
rotary - a deep circular movement used to cleanse the scalp
friction - a quick deep rubbing movement using the pads of the fingers
petrissage - a strong stimulating movement used mainly during conditioning
surfactant - a cleansing ingredient that helps lift grease so it can be rinsed away
porosity - how easily the hair absorbs and holds moisture or products
pH - the measure of how acidic, neutral or alkaline a product is
Deze slide heeft geen instructies