Ladies Cutting Hair Basics
Ladies Cutting Hair Basics
Open the lesson as a practical, professional skill set: safe working, good consultation, and accurate cutting all combine to create a successful service result.
Learning goal
To cut hair using basic techniques by following safe working methods, carrying out a clear consultation, and choosing suitable cutting approaches for the client.
Deze slide heeft geen instructies
One word or phrase you link with a good haircut consultation
Use this to surface prior knowledge such as listening, client needs, face shape, hair type, safety, planning, or style goals. Pick out repeated ideas and link them to the learning goal.
What this unit covers
Safe working when cutting hair
Client consultation before and during the service
Factors that affect cutting decisions
Basic cutting techniques and the looks they create
Current style awareness and how cut and colour can complement each other
This gives students the map of the lesson and keeps all later slides tied to the workbook outcomes.
Health and safety first
Keep tools clean, sharp and fit for use
Maintain a tidy, dry working area
Protect the client with appropriate gowning
Use safe posture and handling during cutting
Follow salon procedures throughout the service
The workbook states health and safety as a core outcome. Keep this rooted in cutting practice rather than general salon theory.
Basic rules for cutting hair
Decide the finished shape before you begin
Choose tools and techniques to suit the hair type and result
Work from a guideline
Use precise sections and clean, thorough combing
Keep each mesh small enough to see the guide clearly
Stress that strong preparation prevents uneven results later. 'Mesh' here means the small section of hair held between the fingers.
Precision while cutting
Cut on a straight line for accuracy
Use head shape and angle to create form
Cut vertically to the fall of the hair to avoid steps
Use natural curl or movement to enhance the style
This slide focuses on control of line and shape. Link it to visible quality in the finished haircut.
Checks during and after the cut
Never cut too short: more can be removed, not replaced
Wet hair can lift by up to 5 mm when dry
Keep wet hair damp throughout the cut
Cross-check by lifting in the opposite direction
Give a final check after drying and advise on home care
The 5 mm shrinkage point is one of the few specific figures in the workbook and should be remembered.
Why should hair be cross-checked in the opposite direction?
To add shine
To check accuracy
To dry faster
To increase curl
Tests the key purpose of cross-checking from slides 4 to 6. Distractors are salon-related but not the reason given in the content.
Complete the cutting rules
Before cutting, decide the finished shape and work from a guideline. When cutting wet hair, remember it can lift by up to 5 mm when dry. After the cut, do a final check once the hair is dry.
All four blanks are load-bearing terms taken directly from the first cutting block.
The main cutting techniques
Tapering - reduces both length and weight
Thinning - reduces weight but not length
Club cutting - reduces length but not weight
Layering - creates layers at differing angles
Graduation - creates graduated lengths by over- or under-direction
Scissor over comb - creates a very short graduation at nape or sides
Keep the definitions exactly aligned to the workbook wording where possible.
Choosing a technique
The technique must match the desired shape, the hair type, and the area of the head being cut. A one-length result needs a different approach from a layered or graduated finish.
This is the bridge from rules into consultation: decisions are not random, they respond to the client and the target result.
Which technique reduces weight but not length?
Club cutting
Graduation
Thinning
Tapering
Checks the exact contrast between the core techniques on slide 7.
Which technique definition feels hardest to remember so far?
Tapering
Thinning
Graduation
Scissor over comb
Deze slide heeft geen instructies
Why consultation matters
Consultation happens before cutting and continues during the service
It helps the stylist plan a suitable shape and method
It reduces the risk of choosing a cut that does not suit the client or the hair
Can you give me any examples of things you might say or do to help you and your client agree upon the type of haircut she wants?
The workbook emphasises consultation as 'very important'. Present it as professional judgement, not small talk.
Consultation factors to consider
Hair density
Hair texture
Hair elasticity
Head and face shape
Hair anomalies or disorders
Hair growth patterns
This slide sets up the consultation sequence used in the workbook. Later slides unpack each factor.
Hair density is how much hair there is per square centimetre or inch. It is not the same as how thick or thin each hair feels.
A common confusion is mixing up density and texture. Make that contrast clearly here.
How density affects cutting
Hair with low density may show the scalp more easily
Very short cuts may be harder to manage on low-density hair
Keeping low-density hair one length can help it look thicker
Stay close to the workbook wording: 'often advisable' rather than making an absolute rule.
Hair texture
Texture describes how thick or fine the hair appears.
Texture scale:
Very fine
Fine
Medium
Coarse
Very coarse
Pronounce and display 'coarse' clearly. The source text contains a spelling error; use the correct form on the slide.
What does hair density mean?
Curl pattern
Hair amount
Hair thickness
Hair length
Targets the common confusion between density and texture from slides 9 to 13.
Complete the consultation facts
During consultation, density means how much hair there is in an area, while texture describes how thick or fine the hair appears. Low-density hair is often kept one length to help it look thicker.
This anchors the two commonly mixed terms and the practical advice for low-density hair.
Elasticity
Normal hair in good condition, with no chemical treatment, has elasticity. When wet, it can stretch by up to one third and return without damage.
Keep this practical: elasticity tells the stylist how the hair may respond during cutting.
Why elasticity matters
Loss of moisture and keratin reduces elasticity
Heat or chemical treatments can leave hair dry
Hair with low elasticity needs extra care when deciding length
The stylist must avoid cutting it too long or too short
The workbook places keratin and moisture in the cortex; mention this aloud if useful, but the key point is the effect on cutting decisions.
Face shape in consultation
Face shape helps the stylist judge whether a cut will balance, frame, or emphasise certain features. Consultation is not only about the hair itself; it is also about how the finished cut suits the person.
The workbook includes face-shape visuals and activities rather than detailed written theory, so keep claims general and relevant.
Using face shape professionally
Identify the client's face shape during consultation
Consider whether the planned cut complements that shape
If needed, adjust the design to create a more flattering result
Do not invent a full face-shape classification system here because the workbook extract does not provide one in text.
Healthy wet hair can stretch by up to how much?
One half
One quarter
One third
Two thirds
Checks the specific elasticity figure from slide 14.
Why is face shape checked during consultation?
Expected answer elements: face shape should be identified during consultation; the cut should complement, balance, frame, or flatter the client; the stylist may adjust the design if needed. Accept any clear practical explanation.
Hair growth patterns
Hair does not always grow in a simple, even direction. Growth patterns can change how hair falls, lifts, or separates, so they must be checked before cutting.
This is the shift from general consultation to specific cutting complications caused by growth direction.
These can easily influence your haircutting service
Always carry out a full consultation so that you can identify any of these growth patterns prior to carrying out your service
The workbook gives a very specific practical adjustment for a double crown. Keep this as technique advice, not theory.
Neck swirls
Leave the hair longer so its weight stretches the swirl
Or cut it very short, such as grade 1 or 2, to disguise it
This is one of the clearest examples in the workbook of how growth pattern affects length choice.
Cowlick and widow's peak
Features such as a cowlick or widow's peak affect the way the hair naturally sits. These growth patterns must be seen during consultation so the cut works with the hair, not against it.
The workbook provides visual references rather than long written explanation, so keep the point focused on observation and planning.
For a double crown, what should you do with tension?
Increase it fully
Release it slightly
Ignore it completely
Twist it tightly
Checks the specific workbook advice: release tension so the hair falls naturally and is left slightly longer when cut.
Complete the growth pattern advice
Hair growth patterns affect how hair falls and must be checked before cutting. With a double crown, release the tension so the hair falls naturally. A neck swirl can be left longer or cut very short to disguise the swirl.
The wording closely follows slides 19 to 22 and checks practical responses, not just definitions.
Working from a guideline
A guideline gives control and consistency
It can be placed anywhere on the head if the shape is understood
Common starting points are the nape hairline or the top of the head
This returns to one of the basic rules and connects it to practical section planning.
Section size and visibility
Take neat, precise sections and avoid meshes that are too large. The previously cut section must remain clearly visible through the hair between the fingers so it can guide the next cut.
Students often rush sectioning. Reinforce that accuracy depends on seeing the guide clearly.
Cutting around the ear
Allow for ear protrusion
Avoid cutting the hair too short in this area
Check balance carefully on both sides
This is a practical risk point from the workbook and is worth stressing for real salon work.
Combining techniques for results
A finished look may use more than one cutting technique. For example, a haircut may need the main length set first, then layering, graduation, thinning, or tapering added in selected areas to refine the result.
This resolves the lesson's central idea: technique choice follows the desired outcome and the client's hair characteristics.
Why must the previous section stay visible between the fingers?
To guide the cut
To speed drying
To add volume
To soften colour
Tests the function of the visible guideline in sectioning accuracy from slides 23 to 26.
Complete the final technique check
A guideline gives control and consistency during cutting. Meshes should not be too large because the cut section must stay visible. Around the ear, allow for ear protrusion and avoid cutting too short.
This ties together guideline use, section size, and the practical caution around the ear.
What is one thing from this lesson you will remember in salon work?
Deze slide heeft geen instructies
Which part of this lesson felt hardest, and why?
Deze slide heeft geen instructies
One word for the skill you most need to practise next
Use this as a closing reflection. Likely responses may include sectioning, consultation, accuracy, graduation, confidence, or cross-checking.
Glossary
Consultation - the professional discussion and assessment carried out before and during the service
Density - how much hair there is in a given area
Texture - how fine or coarse the hair appears
Elasticity - the hair's ability to stretch and return
Guideline - the first cut line used to guide the rest of the haircut
Mesh - the small section of hair held between the fingers while cutting
Cross-checking - checking accuracy by lifting hair in the opposite direction to the cut
Deze slide heeft geen instructies
Glossary
Club cutting - a technique that reduces length but not weight
Thinning - a technique that reduces weight but not length
Tapering - a technique that reduces both length and weight
Layering - cutting the hair into layers at differing angles
Graduation - creating different graduated lengths by direction of the hair
Scissor over comb - a method used to create very short graduation at the nape or sides
Growth pattern - the natural direction or movement in which the hair grows
Deze slide heeft geen instructies
Glossary
Double crown - an area where the hair forms two crown patterns
Neck swirl - a swirl pattern at the nape that affects how hair sits
Cowlick - a section of hair that grows in a different direction from the surrounding hair
Widow's peak - a V-shaped point in the front hairline
Keratin - a key hair protein linked to the hair's strength and condition
One-length cut - a cut where the hair stays at a single overall length
Deze slide heeft geen instructies