Using a Bunsen Burner
Using a Bunsen Burner
To identify the different parts of a Bunsen burner.
To safely use a Bunsen burner to boil water.
To explain when and why the two flames of a Bunsen burner
are used.
To use a Bunsen burner safely.
Learning Objective
Success Criteria
What Are the Differences between
the Two Pictures?
What Are the Differences between
the Two Pictures?
One has a blue flame the other has a yellow flame.
One has an open hole near the bottom and the other does not.
Now carefully watch the demonstration of the correct use of a Bunsen burner.
Label the Diagram of a Bunsen Burner
Key words
collar
tubing
air hole
roaring flame
yellow flame
chimney
base
Extension
1. What does the air hole do?
2. What colour is the safety flame?
3. Why is it called the safety flame?
When the air hole is open more oxygen enters the Bunsen burner, making a roaring flame. If the air hole is closed less oxygen will enter the Bunsen burner, making a safety flame.
yellow
Because you can see the flame more easily when the Bunsen burner is not in use.
roaring flame
chimney
collar
air hole
base
tubing
Using a Bunsen Burner
What safety precautions do we need to put in place when we use a Bunsen burner?
stand up
wear eye protection
tie hair back
put bags away
tuck ties in
Soon, you will collect a Bunsen burner and a heatproof mat.
Why do we need a heatproof mat?
To prevent the Bunsen burner from burning the desk.
Using a Bunsen Burner
1. Place the heatproof mat underneath the Bunsen burner.
2. Attach your Bunsen burner to a gas tap. (Do not turn the gas tap on.)
3. Make sure the air hole is closed by turning the collar.
4. When your teacher has checked that your Bunsen burner is set up correctly it may be lit.
5. Very carefully only holding the collar and the tubing, turn the collar to open and close the air hole.
6. Observe the colour and the sound of the flame when the air hole is open, half open and closed. Record your observations.
Important!
You must wear eye protection at all times.
Using a Bunsen Burner Observations
blue
noisy
/roaring
to heat
things quickly
lots
blue
quite noisy
to heat
things slowly
a little
yellow
quiet
for safety, when the Bunsen burner is not
in use
very little
Using a Bunsen Burner to Boil Water
Set up your equipment as shown.
Equipment list:
Bunsen burner
tripod
gauze
heatproof mat
beaker
thermometer
timer
Measure the starting temperature of the water.
Light your Bunsen burner and start a timer.
Record the temperature of the water every 30 seconds.
How will you know when the water is boiling?
The water will start to bubble and reach 100°C.
Record your results in a table.
Boiling Water Results Table
Important!
Turn off your Bunsen burner as soon as the water reaches 100℃.
Key Word Bingo
Bunsen burner
flame
roaring flame
safety flame
collar
base
oxygen
air hole
yellow
blue
tubing
gas tap
Add one word to each box.