Electricity Transmission


I WANT THE ANSWER, PAGE NUMBER AND TABLE / SECTION.



BEFORE WE APPLY DIVERSITY, WHAT IS THE MINIMUM WATTAGE LAMP ASSUMED PER LAMPHOLDER?

100 WATTS, PAGE 136, APPENDIX A, TABLE A1

WHAT PERCENTAGE OF DIVERSITY CAN WE APPLY TO A COOKER CIRCUIT?

30%, PAGE 137, APPENDIX A, TABLE A2

WHAT SIZE CABLE DO WE USE IN AN A2 SOCKET OUTLET?

4mm, PAGE 210, APPENDIX H, TABLE H2.1

IN A SMALL HOTEL WHAT PERCENTAGE OF DIVERSITY CAN WE APPLY TO A LIGHTING CIRCUIT?

75%, PAGE 137, APPENDIX A, TABLE A2

WHAT COLOUR IS A NEUTRAL CONDUCTOR IDENTIFIED AS IN AN AC CIRCUIT?

BLUE, PAGE 226, APPENDIX K, TABLE K1




1 / 27
volgende
Slide 1: Tekstslide
newEditorTranmissionFurther Education (Key Stage 5)

In deze les zitten 27 slides, met interactieve quizzen en tekstslides.

time-iconLesduur is: 90 min
Dit is niet oké

Onderdelen in deze les


I WANT THE ANSWER, PAGE NUMBER AND TABLE / SECTION.



BEFORE WE APPLY DIVERSITY, WHAT IS THE MINIMUM WATTAGE LAMP ASSUMED PER LAMPHOLDER?

100 WATTS, PAGE 136, APPENDIX A, TABLE A1

WHAT PERCENTAGE OF DIVERSITY CAN WE APPLY TO A COOKER CIRCUIT?

30%, PAGE 137, APPENDIX A, TABLE A2

WHAT SIZE CABLE DO WE USE IN AN A2 SOCKET OUTLET?

4mm, PAGE 210, APPENDIX H, TABLE H2.1

IN A SMALL HOTEL WHAT PERCENTAGE OF DIVERSITY CAN WE APPLY TO A LIGHTING CIRCUIT?

75%, PAGE 137, APPENDIX A, TABLE A2

WHAT COLOUR IS A NEUTRAL CONDUCTOR IDENTIFIED AS IN AN AC CIRCUIT?

BLUE, PAGE 226, APPENDIX K, TABLE K1




Deze slide heeft geen instructies



  • How is electricity Generated?



  • How does electricity get to your house?



Deze slide heeft geen instructies

Choose TWO methods of generating electricity. Give one advantage and one disadvantage of each.

Deze slide heeft geen instructies

  • Learning objectives

  • Identify the UK transmission and distribution voltages.

  • Describe the journey of electricity from generation to the consumer.

Deze slide heeft geen instructies

Electricity supply industry

  • The electricity supply industry has three main parts:

  • generation

  • transmission

  • distribution


Electricity is produced first, moved across the country next, and then delivered to users at suitable voltages.

Use this as the lesson overview. Keep the three terms consistent throughout the lesson.




Step Up Transformer

Deze slide heeft geen instructies

Generation

  • Electricity is generated at power stations.

  • In the UK, power stations are often close to the fuel source.

  • They may also be near a large supply of cooling water.

  • Base-load power stations often generate at about 25 kV.

Base-load here means stations that provide a steady supply of electricity over long periods.


Step‑Up Transformer ⬆️

  • A step-up transformer increases voltage. Higher voltage reduces current, which decreases energy loss in transmission lines, making electricity travel more efficiently over long distances.

  • Electricity is stepped up to very high Transmission voltages such as 400 kV, 275 kV, and 132 kV

Deze slide heeft geen instructies


Transmission

Deze slide heeft geen instructies


Transmission

  • High transmission voltages are used to carry electricity over very long distances through cables supported by pylons, delivering the power to a substation at the destination

  • The conductors are generally made of a steel inner core for strength, surrounded by aluminium conductors around the outside; the cable has no insulation applied.

Deze slide heeft geen instructies

What is the correct order in the electricity supply industry?

A

Generation, transmission, distribution

B

Transmission, generation, distribution

C

Distribution, transmission, generation

D

Generation, distribution, transmission

Checks the three-part structure from the opening slides and the journey from power station to user.

From power station to the Grid

Electricity is generated at approximately 25KV at a power station. A Step up transformer is used to increase the voltage before the electricity enters the transmission network.

Typical transmission voltages include 400KV, 275 kV and 132 kV.

Using a high transmission voltage allows electrical energy to be transferred efficiently over long distances towards major load centres.

Overhead transmission conductors are normally supported by large structures known as pylons.

25KV
Step up
transmission network.
400KV
275 kV
132 kV
long
load
pylons.
230 V
step-down transformer
sub-station
11 kV
step-down
Distribution
230V

All three blanks come directly from the overview and early process slides.

Transmission line construction

  • A pylon normally carries two or three phase circuits.

  • Earth wires or guard wires are placed at the top.

  • They intercept lightning and divert it safely to ground.

  • Conductors usually have a steel core for strength with aluminium around the outside.

  • The transmission cable itself has no insulation applied.

Students may expect all electrical cables to be insulated. Emphasise that overhead conductors are separated from surroundings by air and height.





Step‑Down Transformers

Deze slide heeft geen instructies

Local distribution

  • When electricity reaches a load centre, such as a town or city, substations reduce the voltage for local distribution.

  • Electricity may be distributed at 33 kV and 11 kV around towns, cities and industrial areas.

  • The voltage is eventually reduced further so that electricity can be safely supplied to homes and businesses at 400v and 230v

Deze slide heeft geen instructies

Supply to different users

  • Commercial and industrial users commonly receive 400 V.

  • Domestic users receive 230 V.

  • Heavy industry may be supplied at 33 kV or 11 kV, depending on demand.

Clarify that larger users may take supply at higher voltages because of greater power demand.

Power stations

  • Power stations are where electricity is generated.

  • They are the starting point of the supply system.

  • Their output is sent onwards to the transmission network.

Deze slide heeft geen instructies

Transformers

  • Step-up transformers raise voltage for transmission.

  • Step-down transformers lower voltage for distribution and final supply.

  • They are essential at each stage where the voltage level changes.

Deze slide heeft geen instructies

Sub-stations

  • Sub-stations connect parts of the network.

  • They contain equipment for switching and transforming voltage.

  • Major sub-stations link the transmission and distribution systems.

Deze slide heeft geen instructies

Pylons and insulators

  • Pylons support overhead transmission lines.

  • Insulators hold the conductors in place.

  • Together, they keep high-voltage lines safely supported and separated from the tower structure.

Deze slide heeft geen instructies

Cables

  • Cables carry electrical energy through the network.

  • In overhead transmission, conductors are suspended from pylons.

  • The conductors commonly use a steel core with aluminium around it.

Deze slide heeft geen instructies

Network components together

Power stations generate electricity. Transformers change voltage. Pylons, insulators and cables carry electricity across the transmission system. Sub-stations connect sections of the network and help move supply from transmission into distribution.

This slide pulls the component list together as one system rather than isolated parts.

Fill in the blanks

Select a word to generate electrical energy.

Transformers are used to increase or decrease the voltage.

Pylons support overhead transmission cables, while insulators prevent the electrical conductors from making electrical contact with the supporting structure.

Cables carry the electrical energy across the transmission system.

Substations connect different parts of the network and allow electricity to move from the transmission system into the distribution system. create your first fill in the blanks word

Transformers
Pylons
electrical energy
Substations
transmission system
distribution system
RCDs
Circuits
Trunking

Deze slide heeft geen instructies

Knowledge check

Deze slide heeft geen instructies

Write a short story explaining your journey from being generated at a power station to reaching a house.

Deze slide heeft geen instructies

  • Generation voltage 25KV (25000V)

  • Step‑up transformers increase the voltage produced at power stations to Transmission Voltages so electricity can travel long distances with lower energy losses.

  • The UK transmission voltages are 400 kV, 275 kV and 132 kV across the country.

  • Step‑down transformers reduce these high voltages to Distribution Voltages that are safer levels so electricity can be used by towns, businesses and homes.

  • Distribution voltages in the UK are typically 33 kV, 11 kV depending on the demand and finally 230/400 V for end‑user supply.

Key points:

Deze slide heeft geen instructies

Journey so far!

Deze slide heeft geen instructies